Chosen Solution

So I have 3 droid x2s here with different problems. One has a bad mic, one is completely dead, and one is stuck on the boot logo and will not go into recovery. How could I fix them? I think the mic is soldered to the logic board, could I solder another one? Also where could I get a logic board for the second one? Looked on eBay and ifixit and couldn’t find one. Last question, is there a way to re-flash the os on the bootlogo one?

Can’t get this phone in the UK (as far as I know), so most is speculation;

  1. If the mic is soldered, you should be able to buy a new one and solder this, or desolder and swap from the dead phone.
  2. If this model is not in demand (for parts as well), it will be very difficult to find a board. Only way to get one, unless you are lucky, is to buy a second hand phone with faults unrelated to the board. Best bet is to use the 1st phone as a template and try to figure out the issue without a schematic.
  3. You should be able to reflash the OS using ODIN, ADB or whatever the Motorola equivalent is.