Chosen Solution
PSU: GIGABYTE G750H Mobo: ASUS Prime X570-P CPU: AMD Ryzen 9 3900X GPU: GIGABYTE GeForce RTX 2070 8GB RAM: 32Gb(16+16) DDR4 G.SKILL RipJawsV 2133MHz(OC at 3200) M.2 SSD: Samsung 970 EVO Plus 250GB HDD: Western Digital Blue 3.5" 1TB (7200rpm) OS: Windows 10 Pro Greetings, Recently(1 month ago), I built the PC mentioned above. Lately, almost every time I press the power button to boot the pc, the fans start, the lights on the Motherboard light up, but the monitor has no signal. No beeps sound at startup. If I long press the power button to shut it down and then press it again to start the PC, it boots normaly. I’ve tried to unplug and re-plug the components(RAM, GPU,PSU) the problem still persists. I’ve disabled the fast start up of the windows, nothing. I’ve reset the Mobo and CPU settings, still nothing. Also, I’ve tried using a different monitor, still nothing. Does anyone know what the problem might be? Thank you.
The common cause is corruption of drivers. Much, much more common than any hardware defect. This has worked a number of times for me: Completely uninstall graphics drivers.I use DDU (Display Driver Uninstaller) which has a mode for AMD or Nvidia drivers (Majorgeeks.com is a good download site).Shut down and reboot. Re-install latest graphics driver. Personally, I run Ccleaner and Advanced System Care to clean any “stray” settings that may have been corrupted. But DDU alone is probably fine. Let us know how it goes. For other readers. I have had this problem, especially, when I have switched graphics cards.
In your event manager logs, I see a lot of errors mentioning vendor 10DE (Nvidia) and 144D (Samsung) Try updating your graphics driver using through device manager, as well as updating your HD audio drivers, and M.2 drivers. that should at least resolve the WHEA errors, which should cross that off the list of possible problems.
Hi sender, Have you tried to replaced your VGA? You may try to check also the VGA female connector in your PC. It may had worn out wires.
