Chosen Solution
The flash works, the lights on the camera works, even after I take a picture the sound of the film coming out is there but the film just won’t come out . I changed new pack of film and still the same thing. I thought might be that pack so i changed another pack of new film. Still there the flash, then the sound but the film is Stuck and won’t come out. Please help! I never dropped it before, it was always well taken care of.
@bbluu0310 ,Baybie Luu , Found this info. at the ifixit trouble shooting link below. If the film does not come out of the camera, check the back cover and film ejection slot and check if there is anything blocking the photo ejection slot. There is also a mechanical roller in the camera which is used to eject the film from the camera. Once the film is removed, release the shutter to determine if the roller is functioning properly.If camera still under warranty return for repair/replacement/refund. I will also post a link to show how to disassemble the camera to check for poor wire connections,dust,debri,etc. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. Fujifilm Instax Mini 8 Troubleshooting Fujifilm Instax Mini Eight Camera Shell Replacement
I had the same issue, and I had to peel the little sticker off of the top so the film could make its way out.
Also make sure you press the shutter before winding the “practice film” (aka the plain black film that’s not actually a picture) out.
My films were working just fine until now what do I do?
Check if there’s film in there, the same happened to me and I checked the film box thing and it wasn’t in there.once I put it in it worked again.
Hi…my instax square sq 6…are not opening…what would i do? Do i have to change the batteries?i just used it only once
My Polaroid keeps flashing. I put in a new roll and batteries but when I go to take a picture it starts flashing
my lomo instant camera is brand new and it makes a clicking noise whenever i try to take a picture. it’s brand new film and it won’t print anything out
Hello, my instax mini 70 cannot read/recognise the film. I put a new film but it shows that zero photos left to shoot just like it was empty. What can I do?? Please help I ‘m leaving on holidays in a few days and I need it!!!
I have an instax mini 8 and when I inserted the new set of film and taken a shot to remove the plain black, it takes a flash but the plain black did not come out. After that, the camera lights turned to red and all of the lights were blinking. I have tried to remove the film out of the camera but it can’t be removed, it seems like it is stuck. The upper part is stuck but the lower part of the cartridge already came out. What should I do? Can someone please help me? Can the film cartridge be removed out of the instax camera even if it is not used?
I had a very similar problem, so I took the film out and studied it to realise it was slightly bent in the area which the photo comes out from (I will attach photos) and so I tried the 2nd film and and was absolutely fine!
