Chosen Solution This machine is only 18 months old. During the wash cycle, I can hear the water gushing through the dispenser, but the dispenser fills with water and all the detergent is still in the dispenser with water on top. I’ve heeded all the warnings about not over filling the dispenser, so it is not that. It seems like not enough water pressure comes in to clear out the detergent....
Chosen Solution Why the home button and digitizer not working after change the LCD and digitizer ? A lot can go wrong in an iPad mini repair. You should open up the device and double check your work. Pay particular attention to the condition of the flexes (Home Flex / Digi Flex) as well as the connectors on the logic board.
Chosen Solution Hello everyone. Let me start by thanking you for your help in advance. A friend of mine had opened his MacBook for cleaning, and for some reason the part in the yellow circle had fallen off of the motherboard. Now the laptop doesn’t even wanna turn on. Is there anyway someone can tell us the exact number of that diode/transistor? Or if there is anyway it can be bypassed?...
Chosen Solution Dishwasher does not come on when on button is pressed. There’s not enough information here to give you a good answer. First confirm that it has power to it. Do any light come on? Any error codes? Is it plugged in? Have you check the main circuit breaker. When you say that it “doesn’t come on”, I presume that you mean that nothing lights up on the control panel, so, depending upon the make and model of the unit, there may be a fuse mounted on the mother board that has popped and needs replacing....
Chosen Solution The display on my Zen watch looks like it is separating from the main body in one spot. Due to this the display keeps switching clock faces, and the watch is constantly opening apps with no input and is not responding to actual input. Any help would be appreciated, I paid too much for this thing to not work. Hi @danhouck85 , It appears that the case/display assembly separation may be affecting the touchscreen, perhaps by causing an intermittent connection or loose connection between the display assembly and the systemboard making it appear as “ghost” touching or it having no touch at all....
Chosen Solution Hi! I’m gonna write down everything what happened so you can get a clear picture about the problem. One day I’ve been working on the iMac and the backlight suddenly shut down. I’ve tried everything, but it hasn’t came back. So we took it apart and checked every cable etc. concerning the LCD screen and GPU…then checked if the 4 LEDs on the motherboard are lit (yes), and anyway I’ve been able to see the image on the screen with a lamp pointing on it....
Chosen Solution I have changed my iPhone Display. If I click on the power button, the screen is just normal without any errors. After 1-2 seconds, it turns to an error screen with many (mostly) white stripes from top to bottom. I have tried to plug the connectors again and again, still same issue. Any ideas? Its LCD Issue Replace The New Screen & Check Hope it Works Thanks Varun...
Chosen Solution Was replacing the LCD and digitizer on my phone, when i peeled it away, there was a black sheet of foil attached to the frame that tore. Is this piece necessary? What is it called so i can order a new one? While searching i found little information and the best i could come up with was that it might be for heat and/or light protection. this is the best image i could find/make http://pasteboard....
Chosen Solution Please post here your individual experience on this subject. I did many full installs with the 29$ dvd (ok, 25€ single license and 34€ family license). the “problem” with the update dvd is simple - it’s a retail dvd (thats whats printed on the box) - so what to do - retail is retail. i installed the dvd’s on different machines, some of them were actually mac’s - the rest were hackintoshes (asus eee, sony vaio p, a digital engine and so on)....
Chosen Solution Washing machine makes a clicking noise when we close the door but it won’t lock or start. Door or Lid Latch Assembly If the washer lid or door won’t lock the lock and switch assembly might be defective. This is a very common problem. The lock and switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design....
Chosen Solution Hello! I’m about to upgrade my iMac A1311 Mid2010. This is in my mind: Replacing my old 500 GB 3.5" HDD with a Crucial SSD 256 GBReplacing the optical drive with a 2.5" 500 GB HD (7200 RPM) Then using the old HD to make an external USB drive. Question is: I’ve been reading about problems of the fan when you replace the original hard drive. In the answers given I’ve found this interesting solution using OWC In-line Digital Thermal Sensor....
Chosen Solution My surface pro 3 will not accept a charge or turn on with an AC adapter. I would like a recommendation of a external SSD reader that I could use to with the surface pro 3’s internal SSD if I remove it from the surface pro 3. thank you Hi @tomswango follow ifixit ssd replacement guide Microsoft Surface Pro 3 SSD Replacement and you can try getting the items as mentioned below, https://www....
Chosen Solution So I have this Samsung TAB 2, GT P5100 is the model, it is stuck on a screen saying “Frimware upgrade encountered an error, boot to recovery mode using Keis.” even after I successfuly flashed a stock firmware on it, the same screen still shows up. My guess is that the NAND is somehow broken or something.. Any ideas? Thanks in advance! Hi! Did you try flashing your phone with the repair firmware?...
Chosen Solution Hi, I followed your instructions on installing a new hard drive and now when I turn it on a flashing question mark in a folder keeps flashing. I’ve tried pressings the option key on start up and all that does is take me to a page to log into my wifi and no further than that. Cheers, Ben. Ben - Your new hard drive does not have the needed software on it yet....
Chosen Solution The foam ear pads are deteriorating, leaving bits of black crumbs all over my ears and clothes. Bose wants $35 for a replacement, which seems a bit much to me. My Grado replacements were a third of that. Any suggestions for replacements? I bought a pair of 3rd party replacements on Ebay (Pair of Ear Pads For Bose QuietComfort® 2 Headphones (260789189516). they cost £11.95+ £2.00 postage. They fit well and I am happy with them....
Chosen Solution after transporting the mouse (it’s actually the g502 Hero but I couldn’t find it on the website), the left click button started feeling weird. It’s as if the plate you push down is lifted a bit so that you have to push it down a bit first before there is any resistance. It feels really annoying and mushy and makes the clicking not instant anymore.Any way that I can for sure fix this?...
Chosen Solution Hi, I hope everyone is having great Holidays Here are the three major causes and fixes for defrost problems on your model: https://www.repairclinic.com/RepairHelp/…
Chosen Solution I have iphone 7 plus. It says no service, sometimes its show no sim when i dont insert simcard. But when i input sim card always no service and the iphone getting hot around the camera. I try to replace the charging dock but it doesn’t work. I have second question too. The phone keep restarting because when update the ios. It gets interrupted because of the network, i think....
Chosen Solution Hi I’m having trouble finding a screen that will fit my s3neo as the glass and everything is broken. I was wondering if a screen and or frame from another s3phone but not neo would be usable or if someone could direct me to some where shop wise (preferably not online) or if online amazon please as I have to get this fixed x thanks the glass and lcd are the same, the frame is not…
Chosen Solution Can an Xbox 360 Slim get a better graphics card. And is there a way to make the G.D. Thing not overheat so bad? No. it is built straight into the CPU. Anyways since you can’t edit the games to include better graphic materials, why bother upgrading the GPU?
