Chosen Solution HINi donjave this WD Myboom Essential 2tb and after I reformat this one, it turns into RAW Drive format, it doesn’t open or show in the my computer section but it shows in Disk Management theres no size shown in my compuyter also I tried to change it to fat32 but still doesnt work. Please help mem ianrafael_14 I am assuming (always a bad idea;-) that you are referring to a WD My Book Essential with a 2 TB drive....
Chosen Solution Im not sure if this is an actual issue. I did buy this MacBook Pro used, and i keep on wondering why isnt it showing its Made year? Far as i have noticed, all other Mac’s show that they have been made Early/Mid/Late ???? Why isnt my MBP showing it? http://i.imgur.com/xKCzrMD.jpg edit: also, forgot to mention, when i go over that place with mouse, it does show that there is supposed to be text, but i cant highlight that text....
Chosen Solution I have a LG electric dryer that won’t power on but the interior lights work fine. I’ve have the thermal fuse and high limit,they were both good, I’ve also had the door switch and start switch checked,they too were fine. Has anyone had this same problem that could maybe help me out? I would hate to go purchase something that cost alot of money and it not be it....
Chosen Solution Our washer is 12 years old and we are ready to replace it. I know F 06 is electrical so we aren’t going to repair it. I need to get the door unlocked though to free my clothes. Is there a way to do this without starting a cycle and making my clothes even wetter? Cathy, here is a way to gain access to your washer if the door is locked shut....
Chosen Solution Is firmware available to fix vertical lines on the iMac G5? vertical lines ? - each line is 1 pixel wide and in different colors ? then the answer is no - it’s a hardware issue that many imacs had the only way to fix this, is to replace the lcd I purchased a Hannspree 1440 x 900 vga screen from Ebay for £24.00 confirmed it worked with external miniport to vga adapter in mirror mode....
Chosen Solution So, I have a PS3 which recently YLODed and did a reflow on it. Obviously, I cleaned it up and applied Arctic Silver 5. That seemed to fix the issue, the PS3 is now able to boot up without problem but it seems to be overheating especially when playing demanding games. The first time it turned off immediately after the RDR loading screen but it should not be hot by that time and on the touch it wasn’t....
Chosen Solution Yesterday, on my ancient but trusty T630, a red light started to flicker regularly. I don’t remember seeing this before. Today after turning it on, the light is gone again. Could someone tell me the meaning of this light? I have looked in the user manual and can not find anything! Did you charge it before turning it on today? Sounds like a low battery indication. Hi gmantunt, The phone is turned off and put on the charger every night....
Chosen Solution I recently removed the bottom case lid on my Macbook Pro to install some memory. The new memory appears to have been installed just fine and the laptop is up and working again as per usual, but I’m worried about some slight flex in the bottom of the case that wasn’t there before. There was some slight resistance when I took the case off initially, which I assume was the clips, but when I put it back on after swapping out the memory I wasn’t sure how it was supposed to feel when it went back on....
Chosen Solution I have a fluorescent light fixture that uses two 40-watt 4’ long tubes. It has recently started acting strange. When first turned on, it works fine for a minute or two, then one of the tubes becomes dim and the other becomes dim and flashing. It’s not the tubes, as I’ve replaced those and nothing changed. Someone suggested it might be the ballast. I’m not exactly sure exactly how old the fixture is, but I’d guess it’s at least 10 years old and has been used daily for that entire time....
Chosen Solution I am locked out of my Asus notebook because I forgot the Windows 10 administrator password. I have no any password reset disk. What should I do? There are a lot of important project presentations in the laptop and I don’t want to lose any of them. Please help! Hi @hannah22, Don’t worry. You need a USB flash drive and another accessible computer to help reset your administrator password....
Chosen Solution So the touch suddenly stopped and wouldn’t work. I tried another screen and still no avail. So it turned out to be the touch ic that has malfunctioned. So I had it replaced. The thing is that the front camera sometimes work and sometimes not. The camera goes black until I need to restart a couple of times for it to work. Main camera is fine and flash is fine if that makes any difference....
Chosen Solution Hello, I keep on getting “Service Battery” error. What can I do to solve the problem? When I unplug my adapter my MacBook Pro turns off Hope you can help me Update hi hedre is the screenshot i took hope it helps you:) hope you can see it if you need more screen shots let me know it said current charge was 8904 and maximum charge 8904 was manifactured 2014-12-23 load cycle 4 and mac os x battety status poor....
Chosen Solution I have a Western Digital 750gb external hard drive. I am looking to upgrade my Xbox 360 white model. Will my WD hard drive be compatible with an Xbox? The primary issue with upgrading an Xbox harddrive yourself is that of firmware; see this PCWorld article for some more information.
Chosen Solution I need these components to fix my Macbook Pro and I do not know where to find it In a post here in the forum says that it is a Murata DLP0NSA150HL2 Where can I find this component? Is there an equivalent component? I live in Brazil and everything here is difficult. If you can help me, I thank you. @pcsiqueira DLP0NS is a common mode choke coil from Murata....
Chosen Solution i live in a mobile home and i use a friends wifi but i dont think his wifi signal is strong enough to run my fire tv stick from across the street can i fix this problem with a wifi antanna if so what is the best antanna to use Get one of these: https://www.amazon.com/gp/aw/d/B00L0YLRU… That will not only improve the fire stick, but your entire home. The higher you place it, the better signal you will get....
Chosen Solution My elitebook screen broke few years back and I gave up on the thought of fixing it because previously the battery,speaker,keyboard and touchpad had all gone faulty. I had to add a lot of externals to use it but the screen getting broken was just the last straw. Recently however, I decided that I’ll need to repair this pending when I can get a better one. I want to fix it myself and the screen seems like it may be my biggest challenge yet....
Chosen Solution I recently replaced my screen and made sure all the cables were plugged in. iPod works normally for like 5 minutes but then starts glitching out by scrolling up and down and zooming in and out even when I’m not touching it. Any ideas? That is ghost touching and that means the replacement screen is bad. You can’t. Apple only has the calibration machines released to service centers for iPhone, any iPod Touch or iPad repair and calibration is done in factory....
Chosen Solution Home button and lightening connector got splashed with water while plugged in charging but not noticed for several hours. Unplugged and left for a week in a dry warm place but wont turn or charge. I have opened up device but cannot see anything obviously faulty and cannot see any corrosion anywhere. What is the most likely part that has failed? Logic Board?? If you connect the iPad Mini to your laptop, is it detected by iTunes?...
Chosen Solution So I need to defragment the hard drive of my mac book so that boot camp will let me repartition it. I would like to avoid having to clone the drive and then clone it back. What are some good utilities for defragmenting (or any other tools that will help with the repartitioning problem). All the defrag programs look good, but I wasn’t wanting to pay anything for this, and I didn’t have a external drive I could back up to....
Chosen Solution Hi there, I replaced my A1211 Macbook Pro’s display today (actually I re-assembled the top with cables/connectors from another MBP), but when I turn the MBP off after using it the display stays lit (white). How can this be when it’s turned off? Does anyone know which connector or cable is causing this problem? Thanks so much for helping out! Seems like one of the cable is exposed to the ground....
