Posts

Chosen Solution I have a 2005 Chevy Equinox and water accumulates on the passenger side floorboards when we have a heavy rain. I’ve sealed the sunroof and checked for any clogged tubing, but it still leaks and I don’t know what else it could be. Anyone have this problem and found a solution to it? Update (10/13/2015) The water is clear, so not antifreeze. I sealed the tub that comes down from the sunroof and plugged up all that looks like where a leak could be on the sunroof with silicone....

Chosen Solution One day, I go to use my headphones on my Samsung Chromebook 2, but I am greeted with very distorted audio. I tried everything I could to try to fix it. (Wiggle the headphone jack, remove anything in the audio jack port, etc.) After a while I found out the the headphones work perfectly fine when the mic button is pressed on them. I tested another pair of headphones, and the same thing happened....

Chosen Solution Dear reader, Quite recently I accidentally managed to pull out the the licht fixture from it’s socket in the ceiling of our garage. My questions: Is this fixable for someone with no background in these kind of things?What parts do I need to buy, and how do I install these? (A link to another website is useful too!) Image: https://gyazo.com/82aa9f2c36df45306ed18a… Thanks in advance! (Please notify me if anything about this post is incorrect)...

Chosen Solution If anyone is familiar with iColours, they sell colored inserts that go behind the apple logo on the lid. In order to install these, it is necessary to take apart the entire display housing. With the glossy model, the instructions are to use a suction cup/heat gun/credit card and take off the glass, after which it is very straightforward. However, the anti-glare model obviously is a little different. The only thing covering the LCD itself is the bezel/black trim....

Chosen Solution After the screen was replaced successfully, the phone after about two weeks of functioning properly, will intermittently fade or go black, but the backlight still is turned on and the phone has power. The only way to get the display to come back online is with a soft reset holding the home button and power button until the apple logo appears. No LDI s are tripped inside the phone, appears to be in a very pristine condition....

Chosen Solution I was waking up to answer a text and my phone slipped off my bed and fell into a half full glass of water. I immediately took the phone out and dried it off I took the back piece off and let it air dry cause there was no immediate problems then I get up to use the bathroom I come back and my phone shut down. I turned it back on placed it in rice it turned on fine but now the camera doesn’t work and the apps that involve the camera don’t work either....

Chosen Solution I got this printer yesterday. So it is new, out of the box. I connect it with the USB cable on a Pentium 4 Windows XP and plenty of ram and want to print a document. No matter what I do, install drivers, uninstall and reinstall from the internet, the printer prints the 1 page of any document and then paper jams on the second. It has no problem printing 1 page documents....

Chosen Solution when i power my iBook the two fans are on , led on front is on , but no beep , nothing on screen. the mac will heat normally as it is working, it seems it is always in sleep mode. i removed the battery and power up with ac adapter but same problem. Help Rana First let’s clear the PMU 1. Step 1 Quit all of your active applications and shut down your Mac....

Chosen Solution I replaced the Front Glass/Digitizer with a new one I purchased from IFIXIT but the Home button does not work very well. There is no tactile feedback when pressed, and only works after pressing repeatedly a number of times. Is the unit defective or is there some installation issue I can tweak? Thank you, Paul Update (01/11/2017) Thank you for the feedback. The home button arrived as part of the front glass/digitizer assembly that I ordered from I-Fixit....

Chosen Solution I was watching YouTube videos before I went to shut my Mac down and I had quit all my apps, when I shut it down the screensaver was there and then all of a sudden a photo of what I was watching on YouTube came up and it showed the loading signal and shut down. I see the screensaver sometimes during shut down but this has never happened before....

Chosen Solution I am looking for the hard drive cable lock clip for an Ipod classic 5th generation but also an exploded view of that assembly. I was reassembling mine after replacing the screen and when relatching the clip in snapped and came out in two pieces. Since this piece is maybe an inch long and about the size of 9mm pencil lead the orientation is hard to make out....

Chosen Solution How do i hard reset with no buttons on it Hi, Is there a ‘reset’ pin hole in the back by any chance? If so, gently insert the end of an opened paper clip into the hole and push in until you feel a button being pushed. Hold it there for about 10 seconds and then release. Your tablet should reset and start again. If there is no reset pin hole, what is the model number of your tablet?...

Chosen Solution Hi, while replacing screen op Iphone SE (5S) I have a part I dont know where to put. I replaced a completely broken screen so the part comes from eather front facing camera or home button. The part is small from rubber and quite flexible. Many Thanks!! I am waiting to put it back together until I know where it goes. That goes right next to the front camera....

Chosen Solution I have a Kenmore Elite HE3t washer model 11044932200 that isn’t getting up to a high speed spin on any of the washing cycles. It only gets to high speed on the drain/spin cycle. There are no codes at the end of the washing cycle. I’ve already opened the filter for the drain pump and didn’t see anything clogging. Running it through a diagnostic cycle, the washer drains quickly....

Chosen Solution How can I change or repair speaker Rashid, download the service manual from here. It will download without an extension, rename it to .pdf then open with compatible program. Page 57 will tell you how to replace the speakers.

Chosen Solution and yes, i threaded the needle, and it is all looking fine, but when i try to sew, nothing stays. the needle goes in and out and the thread trails uselessly behind. is there anything to do about this? peace K Update (03/22/2017) this machine does not have a bobbin. it also came with no instruction manual. stroicielka, The video link below are the instructions to ensure you are setting it up correctly and shows how to thread properly....

Chosen Solution I’ve bought a brand new PS 4 Pro. Decided to install a new HDD. When I removed original HDD I saw a scratch (you can see it on the pic) at the HDD bay (not at HDD itslef). Now I doubt that the console is brand new one. http://imgur.com/a/7DzFs Also i mentioned the same scratch at the same place at the photos ifixit made during the teardown. PlayStation 4 Pro Teardown How do you think did I buy refurbished or used console or this scratch is just the сonsequences of the production process?...

Chosen Solution I have swapped out the MagSafe board and installed a different Mb-both items work. Installed previous mb with new/working magsafe board and get dim green light. Is there a way to repair or clean connections on Mb where MagSafe cable connects to MB? Battery works and runs MAc. It does not show charging in system preferences even though light is dim green. I have done SMC and pram resets...

Chosen Solution Hi, today my water bottle (soda) accidentally leak in my school bag so my two devices “TI Nspire CX CAS” and my “Casio Ex Word EW g560c” get wet. The main problem is the TI Nspire because I need it for school. The screen now looks like that: http://m.imgur.com/Nq8Qmk8,9B3z63D It seems that there’s water behind the screen. Currently I’ve put the TI into rice, so it might hopefully dry....

Chosen Solution My screen seems to have a very minor crack (or atleast I think it is minor). It has had this crack for 2 years or more and has worked just fine. When I open and close it, it is pretty loud and makes and cracking kind of noise (almost like stepping on an old floor or step). The camera is very blurry, but I am really not worried about that....