Posts

Chosen Solution I have a MacBook Pro 13" Early 2011 2.3 GHz intel Core i5. To start the mbp I have to take back cover off and remove battery connector for a couple of seconds. After reconnecting battery and case back on, will not start with power switch. As soon as I plug mag safe in computer boots up normally (no switch or keys are pressed). Computer operates normally in this mode, battery charges and the power can be disconnected and battery will run computer....

Chosen Solution Before few days my sell phone dropped in water.. my device still working samsung A8 but display was black and i m just visit nearest service centre he was charge rs 10500 for new display.. If they possible recover display at home so please tell me. Yeah, it’s not cheap Parts https://www.googleadservices.com/pagead/… Labor https://m.youtube.com/watch?v=tZsMLNnO4h…

Chosen Solution “Goodmorning”, After having a wonderful New Years weekend without any time to use my MBP, my week and the year 2017 started very badly. My beloved MBP 15inch 2011 showed a pink start screen with the Apple logo in the middle on Monday morning 2nd of January. After completing the loading bar, my Mac showed a grey/white screen and got stuck and didn’t do a thing. After trying a lot of key combinations in the startup sequence, nothing worked, over time it ended in the same grey/white screen and got stuck....

Chosen Solution I am using Dell T3620, Is it compatible with i7 9700k? Hi, The short answer is NO An Intel i7 9700k CPU is not compatible with the chipset on your motherboard. It will not work. According to the specifications for your motherboard it has an Intel C236 chipset. Here’s a link that states that 8th and 9th Gen CPUs are only compatible with Intel 300 series chipsets and are not backward compatible with Intel 200 series or Intel 100 series chipsets

Chosen Solution I have a new phone that I use the majority of the time instead of the one with all my old pictures and notes on it, so I didn’t notice right away when my roommate put the old phone in the washing machine on accident. It was in there for at least an hour, I think, but I don’t know how long it was in there for exactly. When we discovered it, I panicked and immediately tried to charge it and see if it would turn on (I now know that this was not good to do at all) but put both it and the SIM card in rice swiftly afterwards whenever that didn’t work....

Chosen Solution My screen is not cracked, it just has gray lines and a dark shadow where is landed. Is this the screen, and can I fix it without high cost? @lovelace going by your description alone, this sounds like a broken display. Use this guide to repair it. The part is available at places like this Sorry but there is no inexpensive way to repair this on an expensive phone....

Chosen Solution My dryer won’t start. The red lights work and light inside work, so it has power. I replaced the thermal fuse and door switch. No luck. The panel lights work normally. After I select the dryer setting and start it, it beeps, but doesn’t start. I don’t here any noises after the beep, nor do I see the drum move. I do hear a click coming from the area of the PC board as it beeps....

Chosen Solution In reference to the ifixit page below, this is leaving the current SATA disk correct? Also, once you install the new SSD, how do I get my mac to use that as the boot drive? iMac Intel 21.5" (Mid 2011) Dual Hard Drive Kit After instilling the drive, Boot the machine into recovery mode and then open disk utility to format the new drive and then make sure its set to be used with OS X....

Chosen Solution Hello, I have gotten dust inside the camera housing (see picture), over the normal lens. It affects photos taken with colors not being as good as they should, and graining, especially in sunny conditions. I was thinking about following the IFIXIT back cover replacement guide (Google Pixel 4a 5G Back Cover Replacement) to get access to the cameras and replace the dust sealant from the inside thinking that the dust has come in between the frame and back cover....

Chosen Solution I have a problem with my iPhone 6s+. It started when my phone started to be slow. I rebooted it, and it got stuck in boot loop (apple logo). I then tried to put in in Recovery Mode and update it via Mac/PC (It did not have the latest iOS). The upgrade failed halfway through with Error 14. I then opened the iPhone and disconnected the LCD etc., but still Error 14 when trying to upgrade....

Chosen Solution I have had this Mac for a little over a year. Recently I started noticing that it gets abnormally hot, especially around the top of the keyboard/base of the screen. I ended up downloading Macs Fan Control and noticed that the fan turns itself on, goes to over 200rpm, then 500rpm, 1000rpm, and then back to 0. To me it seems the fan can’t stay on for some reason....

Chosen Solution Yes, I’m totally inexperieced and yes, I never did anything similiar. Total noob.. Some are ground and some not connected but there are missing also connected pads, like A9, A10, A11, B11 etc.. Is this even recoverable ? I saw a video when the guy scratched off the glue and made some jumpers for recreating the pads, .but this seems just so desperate, there are so many. SHould I give up, and just sell it for parts?...

Chosen Solution What is needed to fix iMac A1419 27" LCD Display Screen Skin Temperature Temp Sensor to LCD screen skin. Update (07/07/2018) I have replaced the screen and had to transfer the temperature sensor from the old to the new screen. I noticed that the sensor was attached to the rear of the screen with what looked like a bit of glue from a glue gun. Additionally it was covered with a piece of black tape....

Chosen Solution My floor lamp pole has three sections. I was moving it into my car when one of the sections snapped apart. How can I get it back together there are no threads. It’s possibly a male/female connection like a fishing pole. It may slide right on.

Chosen Solution Hey guys. I have an iPhone 5C here with a recovery mode forced into the device. i boot up the apple logo for 2 seconds, then switches to recovery mode. I connect it to itunes, and try to restore and update. The update downloads all the way fine, then extracts well also. the problem arises while the device is “preparing iphone for install” (Waiting for iphone). When this happens, it switches to the apple logo, like its about to install, but instead of the standard progress bar, it turns off, then on again, and goes right back to recovery mode....

Chosen Solution So I open my camera app and the main cam works fine but the front cam does not initialize and freezes the app and you cannot flip back to the rear cam. You must close the cam app and reopen to use rear cam again. The only work that I have done to the phone is battery replacement. Have not changed the screen nor even opened the front of the device at all....

Chosen Solution My Note 5 got water in it, dried it out and everything started working again except the power button. If it cant be fixed, can I send it to Samsung for repairs ? Bill White, Stop charging or powering up your device until the liquid damage is addressed correctly, as you could be shorting out components inside the phone. You really should take care of the corrosion that is happening inside the phone from the water damage as that could be your problem perhaps with power button....

Chosen Solution Hello i need a hard case like https://www.speckproducts.com/macbook-ca… for MacBook pro 15 A1226 Santa Rosa can someone help me? Thanks regard Luigi That was harder to find than I thought it would be. Here you go: http://www.macbook-case.com/pg.asp?ci=14… Hey, I have this issue as well. Does anyone know where to get one 6 years later?

Chosen Solution I just opened the box on this baby. 10.6 pre-installed. I can’t find a hard drive icon. Has it become a hidden file? I have a Hard Drive icon on my MacBook Pro but it was upgraded to 10.6. check Finder -> Preferences… (Cmd-comma), make sure Hard Disks is checked in “show these items on the desktop”

Chosen Solution hi i bought a diy digitizer kit from icracked and the screen is working perfectly picture wise but it wont let me use the touch screen i cant slide to unlock or anything what do i dooo??? please help :( The digitizer is faulty or not connected to the Logic Board perfectly. Turn iPhone 3GS OFF, carefully open, and reconnect Flex Cable #2. Make sure #1 did not come loose before you close it back up....