Posts

Chosen Solution Still has power….but not drying. Thermal Fuse The thermal fuse is a safety device designed to protect the dryer from overheating. The fuse is located on the blower housing or at the dryer’s heat source such as the heating element on electric dryers or at the burner on gas models. The fuse should be closed for continuity meaning it has a continuous electrical path through it when good. If overheated the fuse will have no continuity meaning the electrical path is broken and the fuse has blown out....

Chosen Solution I recently replaced the battery on my iPhone 6; after completion everything was working as normal expect for the phone earpiece speaker. I tried reconneting the cables inside and removing and refitting the speaker but no luck. There is no sound coming from the speaker at all and I am forced to use headphones or speakerphone. What are all the possible causes/fixes? You may have torn the forehead flex when you changed the battery....

Chosen Solution So I recently have gotten my hands on a laptop in need of a new battery. Battery swap was easy enough, and works fine (thanks iFixit). Another problem has risen though; the trackpad becomes erratic under heavy loads on the CPU. Here are some troubleshooting tips I’ve tried: Resetting SMC - No effect, same inconsistent behavior. External mouse - More consistent control, interrupted by erratic movement and random keyboard inputs (most commonly Cmd+F3 (show desktop) and ....

Chosen Solution Hi, My phone has a strange problem. When I video call with FaceTime, the other side can hear me. When I use another app like Whatsapp or Messenger, and I call with video, the other side can’t hear me. The mic is not working. What could be the problem? There are 3 microphones in the iPhone. https://support.apple.com/en-us/HT203792 The bottom microphone is for Voice Memo and phone calls. The other microphones serve as error cancellationThe (top) front microphone is used for FaceTime calls, Siri and selfie videos with the front camera (FCAM)....

Chosen Solution Hey guys, i dropped my phone by mistake last week and front glass broke(screen is ok, i think so). I´m thinking about repairing it on my own but I´m not that experienced with repairing mobile phones. So, do i have to remove rear side of my phone(galaxy a3 2016) or just heat the front glass and then replace it with a new one? Thanks for all your advices!...

Chosen Solution I got a recent problem, I opened my iP5 recently just to be sure that my Flex Cables are alright and also connected the cables correctly but still the problem remains, shall I try my old screen? Could it even be the screen itself or am I doing something wrong, shall I also check every screw on it’s position? I’m frustrated and my sanity goes beyond infinity. sincerely, Venio...

Chosen Solution No problem currently but I am curious as to what it takes to open the case and what is the layout inside I have, Its really easy to open, Im not sure how easy it is to get to replace things, but i open it up to clean the camera lens. All you need is a star drive and a really small Philips or flat head screwdriver.

Chosen Solution Iphone5se original home button plunger is not working after screen replacement It sounds like you either over- tightened the screws on the home button bracket, or they may be some debris stuck on the home button gasket preventing the button from moving freely.

Chosen Solution My TV screen is cracked @chrissy29 cracked screens are of course not repairable. They do need to be replaced which is not to difficult but the panels are not readily available. If you can find those, they most often cost more than a new TV would be. You could try and find the same model TV as yours, but broken other than the panel. Then harvest the panel from that....

Chosen Solution I have a 15-db1062nl Laptop with 8GB of RAM. I read before buying that it supports a maximum of 32Gb but I didn’t find instructions on how to open it to install the modules. Anybody knows how to do that and can help? This is the bottom of the laptop: Hi, Here’s a link to the hardware and maintenance manual for the laptop, taken from this webpage. Scroll to p....

Chosen Solution My passenger seat belt in the front is stuck and will not move how do I get it unstuck I have tried pulling on it but it won’t budge help? Rae Lynn, it may be your seat belt retractor that is stuck. Check on here and see if that will help. Apparently the 99-05 series have had their share of problems. My thing with seat belts is, that I do believe they safe lives, and personally I’d opt for replacing it with an OEM belt assembly....

Chosen Solution how do I re-enable my iPhone 4 model no. A1349? santiagoanette, follow this advice from Apple. Also, there is a good write up on how to enable it on here. Essentially you have to restore it. " restore on the other hand will return the phone to its default settings and YOU WILL lose all information. You should only do that as a last resort and only do it on the computer that you normally sync with....

Chosen Solution Evening ladies and gentlemen looks like became a member of this KitchenAid club , heater issue. I have model KDTM704ESSO replaced heater element , and yes it was toast Chech thermostat , working ok need to know how to put this dishwasher in diagnostic Mode Any help would be mush appreciated beer and wine for every …… Problem solved. Working like new. all that needed to be done was the dishwasher in Diagnostic mode and let the dishwasher finish its checks....

Chosen Solution I dropped my iphone 5c on tile floor and it was already cracked before that but now the bottom half of the screen is black with green lines and the screen doesn’t work at all anymore. I know how to replace the screen I just need to know if I should get a new LCD screen also, and the cheapest place to get one. Also I can see cracks under the glass, I am not sure if that means the LCD screen is cracked or not....

Chosen Solution Hi I have a Kenmore dryer 400S. A couple of months ago, it quit working midcycle. I vacuumed it out, checked the door switch, replaced the motor, replaced the timer switch, replaced the heating element, and replaced all four fuses. It does the same thing: it activates the heating element but the motor doesn’t run. I’ve rechecked the motor install four times so I know it is in there correctly, and I replaced the fuses twice just to make sure I didn’t get a faulty one....

Chosen Solution Just bought a Mac Mini A1283 (late 2009) with 8Gb ram and a new 500Gb HD. Lion 10.7.5 is on it and works like a champ. I want to upgrade to El Capitan which will run on this mini. I made an El Capitan install USB stick (following instructions on the Apple support site) and booted up, but after about 40 minutes the progress bar stops at 99%. I let it sit for 48hrs with no change....

Chosen Solution I have a brand new top load Kenmore washer that vibrates , in my opinion, excessively in the spin cycle. I have had warranty repair done on it and they have replaced the suspension rods and the drum. I was told there is nothing more they can do. I was also told by the last technician (4 different techs looked at it) that this was normal and there is nothing they can do....

Chosen Solution Sometimes when I open my Chromebook the screen glitches for a bit. Any idea why it does this? Hello Min. (: Here’s how to fix your Chromebook screen: Perform a hard reset of the Chromebook. Sometimes, this will remove these lines since you are resetting the hardware. or, Restore your chromebook. This will reinstall Chrome OS which will eliminate the issue if it is a software conflict. or, Take your chromebook to a repair store....

Chosen Solution Hi, after viewing the Galaxy S2 stripdown and ones on youtube, I am still not sure which side the antenna is located on. I dont wish to strip my own phone down, i just want to know. This howto seems to be the opposite of the youtube howto’s Pls advise. The antenna is an integrated antenna and is part of module GH59-10917A. Looks like bottom right on the explosion drawing in the service manual, which you can download from here....

Chosen Solution I was half asleep this morning and like an idiot I left a spoon in my Nutribullet cup! At first I wondered what the horrible grinding noise was but switched it off immediately noticed the rattling sound coming from the cup and discovered a teaspoon so twisted Uri Geller would be jealous. Removed the spoon and put the cup back in the bullet but the grinding noise is still there....