Chosen Solution I cannot find the hdmi port parts on this website, but that isn’t the problem, as I can purchase from somewhere else. The question is, how do I go about replacing the hdmi ports? You have to remove the entire motherboard, then desolder the old port and solder in a new one. The easiest way is using a hot air station (to remove the old one) and a micro pencil soldering iron under a microscope to install the new one....
Chosen Solution 4g off, wifi on, smart cover on. Actually trying to listen to speaker closely and noticed warmth from the iPad. To get a better feel for the warmth, put cheek on back of iPad. Got a small headache afterwards, which isn’t worrisome by itself. I didn’t think anything of it until I realized there’s a lot of magnets, etc in there (iPad+smartcover). Any reason to worry? Ughhhh. Should not be any different than a 4G LTE cell phone....
Chosen Solution My son’s New 2DS XL has recently been “dropped” and one of the hinges has come undone (not sure if we are missing a piece that holds it in places as it can just pull away - I wasn’t there when it was dropped/thrown). I can see a bit of orangey-brown ribbon cable peeping from the screen-side hinge. This has been severed by the looks of it. What are my chances of repairing this ?...
Chosen Solution My Dell Inspiron 11-3147 fell on the floor and as a result of the drop, and one of the hinges will not rotalte fully any longer. I cannot close the laptop, neit Iher can I fold it like a tablet. That hinge will only rotate a little in both directions, then it gets stuck. I tried to force it a ittle, but it won’t turn/rotate any further. I did not force it too much so that I won’t break it....
Chosen Solution While removing the battery I accidentally tore what I assume is the display cable… What should I do? Do I need to buy a new lcd display? Pictures: https://drive.google.com/drive/folders/1… Yeah, that is a display cable you tore. You will need a new LCD assembly. Huawei Honor 8 LCD and Digitizer Huawei Honor 8 LCD Display Replacement This just happened to me! How’d the screen repair turn out?
Chosen Solution I replaced the digitizer screen on my mini ipad. Now i have colored lines on the lcd when it was working fine. I placed tape over exposed metal on digitizer. Any suggestions? Surprised nobody has answered this in 5 months. That’s a faulty LCD due to breaking the LCD upon lifting it up. Take it to a repair shop to get it replaced. check the loop connecting the screen
Chosen Solution I was silly and ate food while playing on my switch. Now my joysticks keep drifting and it’s very annoying. Please help. https://www.youtube.com/watch?v=zG4JQ6BP…
Chosen Solution No backlight but screen works when flashlight is shined upon it. How do I Check the voltage with a multimeter? Also should I replace the fuse or just replace the entire logic board? Logic board is an 820-2877-b montel chiles you will have to post some good images of your logicboard with the question. Use this guide for that. It will help us to point out some components on where you can test for voltages to you....
Chosen Solution Hi, My unit has the widespread ‘fan buzz’ issue and I want to replace the stock fan with a quiet Corsair model. My question is - how do I fit a new fan into the system? The stock model is designed to fit precisely over the top of the heat sink. I’ve read stories of people successfully replacing the fan, so I imagine that it is possible. Would the new fan simply be ’loose’?...
Chosen Solution I’ve updated my phone and the smart thing app is causing no end of problems in the house. How do I get the app off? Hi @tr3x3ch3k , This link shows how to uninstall apps from your phone. There are 3 ways that you can do it. (You need to scroll down the page a bit to find them)
Chosen Solution Is there a way to put my note 2 back to its original configuration and un do all the factory updates? Resetting the phone to factory does not remove the unwanted features. With every update my phone becomes more and more like the hated i phone. I considered the note 2 almost perfect untill the factory updates now i don’t really like it How can i put it back...
Chosen Solution My abs, brake and traction lights are coming on in my 2001 Cadillac Deville. Do I need a new computer put in or is there some other explanation? Hi @monah , Best way to find out what is going on is to get the car’s OBDII port scanned with a scantool and see what codes are showing. Apparently in the USA AutoZone will do this for free.
Chosen Solution Hi. I have a problem where my iPhone 6 phone won’t power up. I really just want the data. The phone does not need to work after. I sent it out for repair and it came back without the baseband ic chip. I know it’s expensive but can you recommend someone to program a new baseband chip and either install it in the broken phone or in another phone and then put the logic board and other chip in to retrieve the data?...
Chosen Solution I have an old Samsung TV, model LN32A330J1D. Suddenly, the HDMI in stopped working, altogether with the composite video. Tried with several devices, and the TV just don’t get the signal, like if nothing were connected there. However, the coaxial in for areal anthenna works fine. I still can watch free TV using an anthena. I wonder if with these symptomps the problem will likekly by corrected by replacing the mainboard, or wil be the fault in another board....
Chosen Solution The apple store told my wife that the internal power supply stopped working after a coffee spill Cheryl Helsing, I believe that they may be talking about the DC-In board. The DC-in board is the part on your laptop where your wall charger connects to power your laptop. The guide for that is right here. Hope this helps, good luck.
Chosen Solution The dryer of my 2004 Maytag stackable unit stops mid-cycle and makes a screeching sound when I try to re-start it. This happens during the second load. It is likely overheating. I just got the lint cleaned out of the entire interior and around the motor. I was told that it could take more than a month to find a motor due to the overall shortage of replacement parts....
Chosen Solution the earphone port is bad can it be replaced cheaply (by me???) We have a guide for that particular repair here: iPod Classic Headphone Jack & Hold Switch Replacement On that guide are links to replacement parts. Not sure what your budget is, but this should help. Best of luck!
Chosen Solution Kenmore electric dryer 240amp will trip the circut braker on house panel when i have a load in dryer, will run for 5 minuits then the braker trips. I tried just letting the dryer run on no heat and it goes through the cycle without tripping the braker please help! Electric dryers use 220 volts or two power lines of 110 volts each. Some components in the dryer need only 110 volts; the heating element requires 220 volts....
Chosen Solution Hi everybody, i’m working on an iphone 5 that i got with cracked screen, ( it has been cracked under a truck :) ) the porblem is that the phone was working 100% and when i replaced the screen it appear the nand error, surfing on the internet i discovered that was the camera flex so i replaced it with a new one, nothing happened, i putted it in DFU mode and now i have the itunes icon, trying to restore it gave me back the error 4013, i had another original iphone 5 so i replaced the entire screen assembly, still nothing, then i putted the motherboard into another iphone 5 still the same error, so i’m start thinking that is the motherboard…....
Chosen Solution Good evening everybody. I have an iPhone 7 with IOS 11.1.2. Suddenly it stayed “searching” and since then it has been impossible to restore or update the phone. I have been talking to Apple and they didn´t be able to solve it. And, what it is worst, they haven´t give given any kind of solution. Anybody could help me, please? Thanks in advance I had a similar problem, and my phone eventually bricked itself after I tried restoring a few times....
