Posts

Chosen Solution Hi, I have a door closer GEZE TS 5000 and it stopped damping. Is there any way to repair it? Hi Guido, There are multiple ways that your issue arises, And thus there are multiple steps to fix this issue. My first suggestion would be to see if the system can be tightened through conventional means. this can usually be done by tightening the screw on the side of the main enclosure (Usually on the right)....

Chosen Solution Sorry guy square peg, round hole problem ;-{ The 970 is a M.2 drive as well as being a PCIe/NVMe drive, it won’t even work in your system as your system is strictly SATA based. Here’s a useful diagram Your system is legacy the Red path on the left. You’ll need to return it and get either a larger Samsung 860 EVO 2.5" SSD or a second 2.5" SSD to satisfy your storage needs using the Optical drive carrier...

Chosen Solution The computer gets hot a few minutes after turning on and I think it might be overheating. It has shut down after extended use. Your airflow vents may be covered with dust or something else blocking the computer from cooling down properly. You can use compressed air to remove dust from vents and fans. The problem may also be stemming from where the computer is mainly used. Click this link for more help: HP EliteOne 800 G1 Troubleshooting...

Chosen Solution I have an iPhone that I have replaced the battery in twice and each time when the phone is plugged in it doesn’t drain the battery but it doesn’t charge either. I have tried a variety of different chargers and they all do the same thing. Any help would be appreciated! Thank You! More than likely Tristar chip/U2 IC issue, replace and see if it works. Requires board level microsoldering....

Chosen Solution Just got this devise yesterday, after lot of hastle got it set up. Let it die last night to fully charge. Was on this morning said 100%, it powered off on its own so I turned it back on and it displays the powering on screen and then goes black. Has done it every time I turn it on If this is a new device take it back

Chosen Solution The driver side window has slowly gone out. I replaced the switch. Passenger side window operates fine using the new switch. Drivers side seems to try to engage and moves 1/8th of an inch. For a while it would go up and down sometimes. Now it is not working except it appears it is getting a power signal. My thought would be a failed window front motor but thought I would ask before replacing using this guide: https://www....

Chosen Solution Hi there, My iMac has a display that has the model LM270QQ1(SD)(A3). I’m looking to pick up a converter board so I can use my iMac as an external display. https://www.ebay.com.au/itm/203666708700… This listing claims to support the LM270QQ1(SD)(A2) display. I was wondering if anyone knows if there is a difference between the A2 and A3 model? Thanks! LG offers some spec sheets for their displays the custom versions have different suffix ID’s....

Chosen Solution Hello all, Okay i got very interesting and weird issue that i need help with… I have an iphone 5s that discharge the battery very fast like the battery goes to 40% from 100% without me doing anything at all. It gets even more interesting; It charges battery in general but when the battery discharges completely it won’t charge anymore. I know the issue is not battery because i changed the battery 3-4 times and still doing the same thing....

Chosen Solution MacBook Pro 15" Core 2 Duo Models A1226 and A1260 Bought in 2007, never had a problem with the display ever. On the other hand, the DVD drive does not burn any form of CDs at all while still able to read all kinds of CDs. But this is not the most urgent issue at the moment. URGENT ISSUE 2 days ago when studying i close my macbook to bring it to the restroom with me as i was in a public library....

Chosen Solution I’m working on a customers s4 and I don’t want to give them a lower cost than what the work will cost and have never worked on a S4 and just want to now if there is loca glue on every S4? Hi, All screens that are attached to the glass, use a pre sized sheet of OCA (Optically Clear Adhesive) LOCA is basically the liquid version of it, LOCA is only used to attach new glass on Samsungs in a cheaper and quicker way, as you can LOCA the glass on to the screen whilst it is still in the housing (although this isn’t recommended as it can be messy and if too much is used, can pour in to places that can mess the phone up....

Chosen Solution Hi, I’ll in the soon future replace the bottom case/cover screws due to that one screw is a little stripped it littler fall a part I did not use any force at all, it did broke when I needed to tighten (I did unscrew it and then screw it back) the bottom case/cover as the MBP did wobble on the table from factory, now the MBP is rock solid when it stands on the table but I need to replace the screw I can manage to unscrew it but then I can’t use it anymore so I have ordered new screws that will arrive next week....

Chosen Solution does a g4 need a base station aswel as a extreme airport card Your airport card needs something it can talk to. A wireless router plugged into your DSL or cable modem will work. Here’s a couple, I use the link sys: http://www.intellireview.com/Top-Wireles…

Chosen Solution Have a Macbook Pro 13in Retina Late 2012 A1425 that has a functioning screen.. want to take this screen to replace the broken screen on a Macbook Retina Late 2013 A1502. Are they compatible? @guidodavinci these panels are not interchangeable. The wiring is far to different. You will have to try to get the manufacturer label from the back of the actual display panels and compare the datasheet of both of those to determine if it could be made to fit by (possibly) re-soldering the connectors etc....

Chosen Solution I have tried all the “Black screen of death” fixes. Has anyone had this problem? I tried to connect it to a computer as well. What fixes have you tried? The iPhone X has a very thin and flexy logic board and is more likely to suffer catastrophic failure following a drop than previous phone models. The OLED display is also more sensitive to physical impacts. This could be screen related but if you connected your phone to an iTunes enabled computer and the device was not recognized, then you most likely have a logic board issue....

Chosen Solution Dropped the top of the phone (the half with the cameras) into a small glass of water for about three seconds, then fished it out. Panicked for at least five minutes, so I assume some valuable time was wasted. When I got it out, there were vertical straight lines across the screen, with the appearance of a glitch. After two minutes, it went back to normal with a small stain of water behind the screen....

Chosen Solution error (-23) can’t Restore and update Your device or computer might have a hardware issue that stops the update or restore from completing. Check that your security software and settings aren’t blocking your device from communicating with the Apple update server. Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Make sure that your security software and settings are allowing communication between your device and update servers....

Chosen Solution Is it okay to exchange the logic board of unlocked and locked iphone 4s? princesswinlethagno a locked iPhone logicboard will remain locked. So, you can change a locked board with an unlocked board and the phone will work again, but not the other way around.

Chosen Solution i got this tablet fom a client, when i plug it with my original galaxy s8 cable, just showed it was charging, after a few hours, the tablet turned on by its own. i never knew what i did, maybe was the cable, but im not sure, i didnt use either the fast charging brick because it didnt recognized just to add, i used the method that i saw on youtube, setting it on download mode, and helped to boot again....

Chosen Solution I am a newbie to Mac and this forum, so please be gentle. I recently acquired an early 2008 iMac A1225, EMC 2211 - 2.8GHz CPU, ATI Radeon 2600 pro graphic card, 320GB HDD, 24" 1920x1200 LCD. It turns on with no problem. In around 10 minutes, the cpu fan runs in full speed (loud and noisy). GPU temperature reaches 128 Celsius degree in 10-12 minutes, and follows by black screen....

Chosen Solution Hello, I’ve fitted a new complete screen and digitiser and am getting green shadowing on grey backgrounds, please see images. Do you think it’s my fitting or a faulty replacement? Besides this the screen works perfectly. Cheers, Guy. You most probably have a defective screen or some issue with your connectors and connector cables. I would go through the following to rule out some of the most probable causes:...