Chosen Solution I have a 20" iMac (mid 2007) What is my upgrade path for the graphics card ? I have a ATI Radeon HD 2400 XT with 128 MB of GDDR3 SDRAM in my system now. I would like 512 MB at least but 256 MB will do the job. Apple only offered two graphics cards for this series: 128MB ATI Radeon HD 2400XT - Apple P/N 661-4440256MB ATI Radeon HD 2600XT - Apple P/N 661-4436 So you could swap it out....
Chosen Solution When doing some video editing, or working on the machine for a longer time, I get this line running across the sceen Could it be a graphics card issue? Screen issue? Anybody experienced similar? Sadly you’ve hit a known issue that has plagued a lot of people ;-{ Horizontal line on bottom of MacBook Pro 2017 (Due to overheating)Horizontal lines on top and bottom screenMy MacBook Pro 15" Touch Bar Late 2016 screen flicking…Can I repair T-CON Board?...
Chosen Solution Making loud grinding noise at first part of spin cycle and had a spot underneath it on floor that I’m pretty sure was grease or oil. A washing machine making a loud noise when spinning means a part has become worn out or loose. The issue that is causing the loud noise could be a number of different parts inside your washer. If the loud noise only happens when the washer is in spin mode, this can be a sign that the main tub bearing is worn out....
Chosen Solution Hi all Got my girlfriends sons laptop that has a weird problem… the right hand side has two bars of really weird glitches.. sometimes only one and then back to two.. ive even pushed on it and it sometimes goes away and then comes back.. the logic board is in great nick and my friend has checked the the connector and dosnt seem to have any broken connections. What do you all think Cheers...
Chosen Solution Hi there, I am not shure was is meant by “not enough information”. It the DUT is an apple Xerve G5, single CPU, 2GB of RAM, 80GB SATA harddisk. I am currently running OSX 10.4 supervising the XSERVE by an Mac Pro (Intel) having also the same OS running. In the log files I can read that the XSERVE has lost network connection and therefor it performs a full restart....
Chosen Solution I’d like to add an 820-3115 board to a 820-2936 machine. My board wasn’t recognizing the battery so I send to for repair. Now it is completely toasted by a “fixing” company and now it won’t even turn on. Anyway, what problems will encounter to replace old 2936-b with new 820-3115? Please someone? I need to buy from eBay and I don’t won’t to waste my money for a board that won’t work....
Chosen Solution Sir/Madam, Tell me total expense of full body replacement of Edge E530 without keyboard ? Hi, I assume that you are referring to the base cover assembly. This is where the hinges screw into. Is this correct? Here’s a link to the service manual for your laptop. Scroll to p.97 to view the necessary pre-requisite steps and then the procedure to remove the base cover assembly. To get a replacement, search online for a Lenovo ThinkPad Edge 530 base cover assembly to get results for suppliers and prices....
Chosen Solution So this iPhone 5S I received in with a home button problem. The button is working intermittently, it is hit or miss, sometimes it will work for a full 2 minutes then it will be off for 5 sec then working again for 30 sec and then off for a minute, there is no pattern, just hit or miss. Touch ID is still functioning perfect. I have never seen this issue before....
Chosen Solution I replaced my battery and lighting connecter a few moths back. When I finish the job everything was fine. I cleaned my phone with a wet wipe and my home button started playing up (water damage maybe?). It used to work intermittently, then stopped altogether. Touch ID still worked, the eventually stopped also. I finally replaced the Home button the other day and its still not responsive. Any ideas?...
Chosen Solution .So i replaced the whole front screen,kept original home button and top ribbons,snapped everything back in and now no responsive home Button? Why is this? Sometimes the ribbon cable within the display can be defective. If the old screen still works, you can test it with that one to confirm whether it’s that ribbon cable or not. Go back and check all connections. Where did you get the replacement from?...
Chosen Solution I bought a case and it had a sticky thing that kept the Ipad in place. I took it off because after 1 year of use the iPad wasn’t sticking to the case. When I removed the case the sticky things was on the back of my Ipad and wouldn’t come off. I need the back piece if the Ipad. I guess what’s left on the back of your housing is some kind of adhesive that might be removed one way or the other....
Chosen Solution I recently replaced the hard drive cable on a MacBook Pro (13-inch, Mid 2012). The machine has an SSD installed running 10.9.5. After replacing the hard drive cable I attempted to boot up the system. It gave me a gray screen with the Apple logo, then the thick firmware update progress bar below the Apple logo. It gets about half way through the firmware update progress bar and then the machine powers off....
Chosen Solution I spilled coffee on my wireless mouse & keyboard USB receiver. I need a little help figuring out how to clean it. (any help would be appreciated) -Thanks in advance If coffee little coffee went in then just put them in a bag with rice or even better silicon bags for 24 hours. But if coffe is visible floating in there then u need to open them up dry with tissue then put them with silicone bags or if u don’t want to open them put them in a little warmer place at 40 Celsius with silicone bags for at least 3 days....
Chosen Solution My cousin wants to get rid of windows xp on boot camp but when i use disk utility nothing happens also when i go to boot camp it says the os must be formatted as a single i don’t know but how do i get rid of windows You’ll need to use Disk Utilities from your system installation disk or other retail Mac OS install disk and reformat the drive....
Chosen Solution So, I did a thing… I replaced the battery in my iPad Pro 9.7" a month ago, but upon setting the screen in place with the adhesive and testing to make sure it worked, I got weird banding of colored lines and a white halo around the edge of the screen (see attached image). I had to use a heat gun to remove the screen, and I had to heat it several times just to get the adhesive soft enough to work a spudger under the screen’s edge- so I think I fried the screen....
Chosen Solution Hi! I bought the screws and a caliper. I was wondering if I should measure the length of the thread, of the whole screw (ie. From top of head to bottom of thread) or the width of the thread? Thanks! When comparing the screw sizes to those listed in the iFixit guides, measure the whole screw (ie. from top of head to bottom of thread).
Chosen Solution Is there a HP DMI tool for 00A system board error. Missing product ID info causing aboot up error? I have all this info to enter into something… Thanks Update (11/17/2019) Mike: Thanks for your quick reply. I have an HP Pavillion 510-a010, bought it new in 2016. I will try your solution and I have jumped the CMOS jumpers but that did not work. Is that what you are referring to?...
Chosen Solution Hello I have a very strange problem on a customers iPhone 6s Plus. His Earpiece and Ambient Light Sensor have stopped working but the front camera is fine. So I replaced at first the earpiece (nothing changed), second the front camera flex cable (still not working) and last the whole display unit. All three attempts have not lead to a solution. Still the Earpiece and the Ambient Light Sensor are dead....
Chosen Solution F35 error code - can’t find this in my manual under troubleshooting The F35 error code indicates an analog pressure sensor error. The analog pressure sensor is the component that detects water level in the washer tub. This error can usually be cleared but it will occur again if the main control board still detects a problem with the signal from the analog pressure sensor. This error code can be caused by a problem with the air pressure tube between the bottom of the washer tub and the analog pressure sensor....
Chosen Solution Hello all, I recently purchased a untested A1286 15” MBP. it came with no battery or HDD, I installed a known good battery and a SSD with El Capitan. it would boot to grey with Apple logo and loading bar, at about 3/4 progress, it would fade to black, come back with a blank grey screen, and hang. Now I dug a little further, because I noticed it was powering on by itself once I plugged the MagSafe in, and I couldn’t get a response from the keyboard....
