Posts

Chosen Solution Hi there! I am having a problem with an ipad 4 that came back for repair after a few weeks claiming it suddenly started ghost touching. After testing it shows that it does generate ghost touches but also on multiple digitizers. Even when i set the digitizer vertical next to the frame so it does not touch the frame at all it keeps doing it. Most of the times it does not even respond on any touch input and just starts flipping out on its own randomly, sometimes more worse then the last time....

Chosen Solution The Canon Eos 7D can turn on and operate but when I turn any button is had the sign Error 40 and than I switch off and take out the battery and reboots but another thing is that when I switch to movie its work and also can take picture. What the real problem. Hope to hear from you soon. Thanks Good Day Chris, Can the error 40 be clear once and for all with other kind of method....

Chosen Solution Sadly no. You new HD is much to fast for this older system. Your MacBook has a SATA I (1.5 Gb/s) Interface which can only support a HD or SSD which can run at this slower I/O speed. In your case your HD is a SATA III (6.0 Gb/s). You could try checking if your drive has a compatibility jumper (older drives had it). If this is a newer unit that won’t be an option....

Chosen Solution The only way I can get this machine to boot lately is if I boot with the HD from Firewire. And when I do so, the optical drive won’t play any media; DVD or CD. Any ideas? Update Hi: I’ve tried both suggestions and on either case System Profiler did not show the optical drive or the HD.. Is it possible that the IDE channel is broken. I’m thinking this because both the optical and the HD are connected to the same channel....

Chosen Solution Hi! I would be grateful for your advice on troubleshooting this problem; I was using my iPhone 6 plus, and the top right corner of the screen went dim. I thought this meant I would need a new screen. However, within 10 seconds it felt warm on the back of the metal case (where the motherboard is). The battery was 45% charged and went down to 36% within seconds....

Chosen Solution Hey guys, the home button of my galaxy S6 won’t work properly. It does recognize my finger id and unlock the phone, but nothing happens when i press the button. My question is: Is the finger id sensor going to work normally if i would replace the home button? I know from iphones, that the finger id is blockt with other buttons then the originally installed. Is this so with the galaxy S6?...

Chosen Solution Trying to find out what chip or chips on the iPhone 6 logic board store the network carrier lock? I would like to switch to back to AT&T from Sprint. I have a broken AT&T iPhone 6 and a good Sprint iPhone 6 I tried swapping whole logic boards but the AT&T board is damaged So I would like to try just swapping the needed chips. Don’t care if S/N’s don’t match, not going to sell the phone I just want it to function....

Chosen Solution Our son just got the Regulator for Christmas. We put the batteries in it today and loaded the mag to let him play with it. Well,that didn’t go as planned. It revs up like it’s going to fire. But when you go to pull the trigger nothing happens. It doesn’t matter what selection you are on for firing either. I did look at the belt that helps propell the dart without a mag in it with my finger pushing down the sensor button....

Chosen Solution Hi, Just reballed a iPhone 5Cs u15 IC since touch was bad. Done this plenty of times before, without any problem. Now it’s completely dead and board becomes really hot. I accidentally removed heat shield for CP because of brain lag (thought it was iPhone 5). Except from that nothing special. U15 installed correctly and not find any damages in my visual inspection. Now clue how I should proceed now....

Chosen Solution I’m replacing the display on my iPhone 7 and I got to the step where I was reattaching the old home button onto the new display. I must not have aligned the pins correctly when I pushed down because I couldn’t get them to connect and now I think the pins are bent (see photos). Is there still a way I can fix these pins and get the cable connected?...

Chosen Solution Did you figure this out? I have the same problem. My dishwasher does great except its leaving the rinse water and I can’t force it to drain until it has sat a couple hours. Hi @sonnyjunebug, Here’s the tech sheet for the dishwasher. Try running the diagnostic tests as described in the tech sheet and check for any error codes etc. If no codes then run the DW as per normal and when it doesn’t drain, disconnect the power and disconnect the harness from the drain motor and measure the drain pump motor resistance to check if it is within specs i....

Chosen Solution The laptop just started going black, even though I see power to the CAPS LOCK (blinking white) and the Airplane mode key is on (orange). I tried different memory, no change. I tried hooking up to a HDMI and switching to another TV, no change, no picture. I removed the drive and hooked it up to a USB3.0/2.0 to SATA/IDE cable and it seemed fine. If I’m going to replace the motherboard (video card seems soldered as well as CPU) I was wondering if there was another motherboard that would fit the existing parts?...

Chosen Solution So a repair guy said he needs to replace this on my Macbook Pro 2015 but he doesn’t know what it’s called, so I thought I could help him look for answers. Any ideas? It’s a mosfet and you can find the exact item through looking at the schematics and board-view for the logic board’s board number. The board number is located usually near the edge of the board....

Chosen Solution Noticed first that the detergent either simply puffed up or fell into the cutlery tray, but did not dissolve. Tried GEL next, and all it did was run down the wall on the inside, all after running a complete cycle. So it appears no water is being sent through the 3 wash arms (that spin) Water drains out fine. This is a Maytag Dishwasher Model MDB-3 (MDB-7600AWB) William, if your dishwasher gets water for sure, there are a few things that could cause your issues....

Chosen Solution Is there a CMOS battery inside of the Xbox One? I’ve tried everything and am still experiencing an issue where the Xbox dings when I press the power button, and then turns off, rendering useless, and I’ve heard the issue is sleep mode and I’ve gone through !&&* trying to fix it. Hi Lex, Looking over the board, I don’t think the Xbox One uses a CMOS battery- at least not when you can take out....

Chosen Solution I dropped my ipad about 6 inches in a case and it quit working will not turn on orcharge. any suggestions as to what to do about it ? Things i should try or anything?? I would appreciate any info. Thank you very much ahead of time It might just be the screen broke because of the hit as well as the logic board. First steps would be to open up the iPad and try a known good screen if visual inspection doesn’t show other damages....

Chosen Solution Hello, I bought a used iPhone 5S on eBay in a good condition. I received the phone and tryed to activate it over iTunes and internet but it doesn’t worked. The activation failed because of the not reached activate server). So I decided to recover the phone. All seems good until the process bar reached the end of the Apple logo. The process bar stucked and I got the error 50....

Chosen Solution Canon PowerShot SX 200 IS My camera´s flash doesn´t work. It pops out as it should, but it doesn´t flash and the sign in the display says “flash off”. Can´t be switched on. Canon support says it has to be replaced for 100 €. I would like to try to repair it myself, but have no idea how to do it and which spare parts I will need. Could anyone help me?...

Chosen Solution I removed panel inside the freezer, fan is spinning, coils are frosty but not overly frozen. Defrost thermostat and heating element appear good, did not put meter on them, since coils were merely frosty. Nothing seems to be protruding to keep the door from fully closing. Temps fluctuate between 35-50°. Where do I need to start looking? Hi @tommysparks1 , What is the model number of the freezer? Are there any oily residues on the condenser coils or near the compressor which may indicate a leak of refrigerant?...

Chosen Solution Does anyone know how to replace the front touchscreen on a Samsung Galaxy mega 2? Douglas, posted a video link below, on how to replace the front touchscreen on a Samsung Galaxy mega 2. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. https://www.youtube.com/watch?v=lQWVR-ph…