Chosen Solution try a battery with the same apn as original one, it’s possible to get a bad battery as they can sit on shelves for a while..or order another 0435 from a vendor with good feedback. Restore from backup and not update?
Chosen Solution I need help finding out why my xbox keeps turning red or bugs but why. The best site for this in my opinion is www.llama.com it has a whole section dedicated to what each numerical error means, each combination of the 4 red light errors and some of the repairs. Hopefully I’ve got the right link but it’s definitely llama… HI there. You can take a look at the Troubleshooting page for the Xbox 360....
Chosen Solution I took a flash photo yesterday and it the screen immediately turned black. I could not turn on the Iphone after that. I have no clue why this was the reason although I think there was some overheating near the LCD screen connectors afterwards. Hello Tim, quite simple answer: someone who repaired your phone previously replaced a small component that costs $ 0.15 for a free wire out of pocket (jumper on the line)....
Chosen Solution Recently I replaced the 1 TB hard drive with a 1 TB SSD and forgot to split the fusion drive. Since I already paired the old SSD to the new SSD I cant simply reconnect the old drive. I plugged the old hard drive into another computer i have and the drive wont mount. Is there anyway to get the data off the hard drive? First setting up a dual SSD Fusion Drive really doesn’t improve performance!...
Chosen Solution Hi all, Hoping someone can help me here because I’m running out of options. After replacing the front panel of my friend’s phone, the front camera is much lighter than it should be - it’s not blurry or anything, it just seems like the white balance is completely wrong. Rear camera is fine. I’ve cleaned the lens with a microfibre cloth - no change. I’ve checked what it looks like not through the front panel (turning the phone on when half open) and it looks the same, so the front glass isn’t dirty....
Chosen Solution I did a complete teardown of the iPhone 5 and then when I put it back together the front camera is stuck in the shutter just like the iPhone 4 used todo. Is it something I did, I know on the iPhone 4 when unplugging the cables it was possible to break off one of the connections bridges on the logic board. Is this what happened? Please help!...
Chosen Solution the screen got push some how Ty M, Find links below 1st link is the service repair manual and 2nd link is possible replacement generic screen which you can also do a search on for possible better pricing. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. http://tim.id.au/laptops/hp/compaq%20evo… http://www.sears.com/search=HP%20%20Comp…
Chosen Solution my 2 year old spilled water on my ps4 now wont switch on how do i get it working plz Hi @northerndan1987 As you know water and electronics and electricity are not a good mix. The impurities in the water causes corrosion and provides circuit paths for the electricity which were not in the console’s operating design and could damage the components. First do not connect or turn on your console Then you need to dis-assemble the console and clean all the affected parts using Isopropyl Alcohol 90%+ (available from most pharmacies) to remove all traces of corrosion and water....
Chosen Solution Have solid vertical line left center side of screen. Have been able to clear it at times THOMAS TURNER a single solid line can be caused by a tab bond failure, bad panel or a bad T-con board (unlikely) and many more issues. First thing you want to do is to tell us what model your TV is. Then you want to take the back off your TV and check the boards for obvious damaged like leaking or domed capacitors....
Chosen Solution When I plug in my headphones to my laptop, the sound continues to play through the speakers. The sound worked fine through my headphones until I dropped my device which was when the problem started. Occasionally the sound will flicker between the speakers and headphones around every second but will always eventually settle on the speakers and completely ignore the headphones. Is the laptop broken or is there a way to fix this?...
Chosen Solution Can I fix the on/off switch on my clamcase? Or do I have to buy a new one? How was it damaged? What is the ClamCase warranty? ClamCase® warrants our products against defects in materials and workmanship for a period of 1 year from the date of delivery. Under the 1 year warranty, your item may be replaced depending on the extent of defects. Your warranty only applies to the specific device model that was purchased and is non transferable....
Chosen Solution Okay, so about a month ago my iPhones volume started to not work. I would try to turn up the volume but it wouldn’t go up. After about a week, something else happened. When I turned down my volume one bar, it would then turn down all by itself! Now, both volume buttons are not working and in order to listen to a Youtube video/ music I have to keep my finger on the volume bar on the screen to keep it from turning down or up by itself....
Chosen Solution macbook Pro 13" 2010 My hardrive keeps disconnecting, the computer says it cant find it. Is there a website that will diagram the inside of my mac so I can try to fix it? Most likely issue is a damaged hard drive/IR cable seen here: MacBook Pro 13" Unibody Mid 2010 Hard Drive Cable Replacement I prefer to replace it with the 2012 cable. On some models the retain bracket has to modified to use the newer cable....
Chosen Solution I was on a school bus and I spilt water on my blazer and it got on my phone and it still works I can hear notifications and when people call me but the screen is completely black so I wanted to know if I could fix it myself, or if I had to get someone to fix it how much would it cost? Thank you. Hi @shauntysk , The impurities in the water causes corrosion and provides circuit paths for the electricity which were not in the phone’s operating design and could damage the components....
Chosen Solution Can you fix the part of the ipod where the USB caple plugs in. Some of the “teeth” are broken ryan faircloth, not an easy job. as you already know,you will have to replace it in order to get your iPod back to normal function. It is an interesting job to say the least. You have to remove the logic board and then desolder the connector. The dock connectors are available at multiple places like this Then you have to resolder the new one....
Chosen Solution Hello. I work in a PC repair shop that refuses to work on cell phones, tablets, mac books, etc. There is no one in my town doing this and I figured I’d learn the skills and do it. How do I start? Do I buy random broken phones and the required parts online and fix them at a monetary loss? What brand should I start with? What should I do with obsolete phones that I repair for practice?...
Chosen Solution I have an HP officejet printer and I am having trouble finding a printhead for it. The screen tells me it can not print due to printhead needing to be replaced. Hi, Depending on your model (you don’t say) it is usually cheaper to replace the printer than to purchase a replacement printhead, if you can find one that is. Update (12/15/2016) Hi, Are you aware that there is a possibility that your printer may be replaced by H....
Chosen Solution Hi, I got a a new back panel for my iPhone 3GS. I managed to re attach the power button, headphone jack an sound controls. However when it comes to re attach the ribbon cable numbered 6, I just can’t understand how I’m supposed to do it. I’ve been trying for almost 4 hours turning it around and attaching it to the logic board to try and make some sense of it....
Chosen Solution Hi, I have a dell latitude 2100 netbook which is quite old and i want to revive that for my small projects, so i got the broken screen replaced and that worked fine for a month but after sometime it started flickering. and now even on slight mechanical vibration or movement the screen goes off while the PC is still running. You can get better idea from this video....
Chosen Solution I would like to diagnose the iMac 2011 which I got from a friend. The iMac seems to be working as I hear the chime at startup. The display appear to be black. I did the following: Checked display in a dark room : - nothingShine a light to the display :- no pictureChecked inverter of the LCD with voltmeter “: work fine Now from here there are different possibilities as follows: Broken LVDS connector at the logic boardBroken LED strip inside LCDBad LVDS connector cableGod know what exactly So I want to begin with LVDS connector at the logic board....
