Posts

Chosen Solution The dryer was not running due to a bad breaker. Electrician replaced the breaker. Now runs for 2 minutes, then shuts off breaker, reset breaker, same result every time @r_stoller , Roger, Did the dryer work OK before or is this a new location were 30 amp breaker installed. If dryer still kicking out breaker in the homes circuit panel, there must be a short or some thing overdrawing power in machine, a ampmeter can be clamped on to see if dryer is overdrawing....

Chosen Solution I just replaced the ear speaker on an iPhone 5S because of very low volume. Install went smoothly, speaker port is clear and the black gasket is in the correct position, still very poor volume from the ear speaker. Everything else on the phone works fine, any ideas what else could be causing this problem? Thanks Update Been trying to fix this and I finally found something that worked: Settings—General—Language & Region scroll down and change the language to English (UK) Exit settings Go back in a change language back to English (US) I found this solution online, and I thought there is no way this can do anything....

Chosen Solution it gets hot and the fan is running all the time Try resetting your smc: Connect the power adapter to the Mac. On the MacBook’s keyboard, hold down the Shift+Control+Option(alt) keys and the Power button at the same time. Release all keys and the power button at the same time – the little light on the MagSafe adapter may change colors briefly to indicate the SMC has reset.

Chosen Solution The film advance lever won’t move more than 1/2", how do i troubleshoot this problem? Does it have to. Have film in it to advance? Does it have to have the batteries in to have the advance lever move? Herb Hi Herb, I used to work on dozens of the x-370’s. The problem might be the shutter is already advanced and the shutter won’t release because of a bad capacitor on the bottom of the camera....

Chosen Solution Unable to unlock my Samsung s6. I have forgotten my password If you dont have any data to lose off the phone do a factory reset . This will remove the password and make the phone like it was when you first got it but remember all data all apps all contacts will be lost. this video show both a soft reset and a hard reset for removing a password https://www....

Chosen Solution You just want to get our pentalobe screws and use it thats why you swapping youR FAKE philips screws maybe you sell it for money or use it guys dont believe with i fixit you can easily fixed your phone any screw oh my gad ifixit your TERRIBLE im so dissapoint there ypur trying to grt people mind!!! Kurt, I really don’t think there’s a large black market for pentalobe screws, but I could be wrong....

Chosen Solution How do I replace the CMOS battery on my Gateway SX2803? with the switchim1947 power your computer COMPLETELY downwith the switch on the back panel that is actually located on the power supply. I even unplug the computer. Then you need to remove the side of the computer case (this may be different by your specific model. Post some pictures of what your case looks like etc. Use this guide Adding images to an existing question for that....

Chosen Solution We are going to buy HP EliteDesk 800 G1 tower CPU and its interface type is PCI Express x16 . i want to buff my pc by upgrading its graphics card. i read about something about PCI 2.0 and PCI 3.0. if i bought a PCI 3.0 graphics card, will it work with my mother board? what GPUs can you recommend that will suit in my current MoBo?? btw my mother board is Intel Q87 express...

Chosen Solution Hi, I had this MBP model A1211 but something happened. It turned green on screen and the Apple logo in purple / magenta when startup. does anyone know what is possibly goes wrong? is that software malfunction or hardware? Sadly you’re hitting the GPU failure this system is famous for. Sorry time for a new system.

Chosen Solution Hi, I replaced the screen on my iPhone 6 and now half the screen is black and there are vertical colored lines and the other half is really glitchy and like is flickering really fast. Touch screen and everything else seem to work, just the display. I would appreciate any advice . Thank you! It sounds like a bad connection. Take a magnifying glass and make sure the connector is not damaged....

Chosen Solution I was just surfing the web when my hard drive started to click. It sounded really bad so I turned it off. I was able to boot into safe mode without it clicking. It sounded fine and I ran first aid on the drive and nothing was wrong. I was still skeptical that my hard drive was about to fail so I replaced it and tried again to boot it up and it continued to make a clicking noise so I shut it off....

Chosen Solution Good morning, My MacBook A1534 (year : 2015) has suffered liquide damages and the « power » button does not work anymore. Do I have to connect the USB Charger 12 Volts or do I have to use an Iphone Charger via USB in order to try to boost, having disconnected the battery, I want to determine whether it is the keyboard or the Logic Board that is not functionning....

Chosen Solution I have a mid 2012 unibody macbook pro, 13". Model A 1278, model identifier MacBookPro9,2 2.5Ghz Intel core i5. And it says Mid 2012 when I display system info. So I am as sure of the model as I can be, but of course, if someone has a doubt or something I should check to be sure, fire away and ask. I need to replace the bluetooth board because of low signal....

Chosen Solution Help identifying part attached to power button assembly a black box with this info “Veco CZ145” Has a flat 4 ribbon soldered to power board and a 2 wire black/white connector to motherboard. It is a part associated to power. Thanks HP Probook 650 G1 motherboard 744016-001 UPDATE Problem solved thanks to member “jayeff” Hi @gensin , Don’t know the answer here’s an image from the schematics for the motherboard, (I think they are the correct schematics anyway) showing the power button board circuits....

Chosen Solution i put it games and it wont load how do i fix this problem sonic adventure and jet grind radio are calling my name please help Alex, there are a couple of videos on youtube that may help you with that. http://www.youtube.com/watch?v=HTMSRfEqW… is one of them as a rule of thumb I would get a can of air duster and try blowing out the whole laser assembly including the gears and track....

Chosen Solution The horn on my 2010 Hyundai Elantra GLS goes off intermittently when parked and not running. It always blows 18 times, stops for about 5 seconds, then blows another 18 times. I can push the lock or unlock button on the key fob and it will stop, but will start again on it’s own, for no obvious reasons. I changed the batteries in the key fob but that didn’t help....

Chosen Solution I cracked my shield’s screen, and now only a portion of the screen works. I need to find a replacement, and figure out how to change it. Or if someone could do it for me. Hi, Here is a link to the Ifixit guide on how to replace the Nvidea Shield display assembly. Nvidia Shield Display Assembly Replacement Unfortunately I couldn’t locate a replacement screen. Perhaps you will have better luck....

Chosen Solution My brother’s friend gave him an iPhone 4, and it’s disabled. All we can do on it is slide the lock screen to call for an emergency. We’ve tried to connect it to iTunes and it’s not working; it just says “error.” At first, it said iTunes needs to be updated, so we updated it. Then it says “iTunes cannot connect to iPhone because it needs a passcode.” It tells us to enter the passcode and try again, but the iPhone itself doesn’t let us do that....

Chosen Solution I need to get out a sim card in the sd card slot Hi @kidtechnerd , Open the console and try gently pushing the SIM card out from the SD card reader. Here’s the Ifixit Nintendo Switch Micro SD Card Reader Replacement guide that shows how to access the card reader. If the reader is damaged by trying this, Ifixit has replacement card readers available.

Chosen Solution I’m a little bit dissapointed, this morning I wanted to start my laptop but I got a “no boot device found” error. I set my HDD to #1 in the BIOS setup boot sequence. I went into diagnostics and the hard drive tested as good. The last time the system was used it booted fine. Did you know what the fix was? I was trying to boot from “Internal HDD” but it turns out you had to boot from “Toshiba [model number]” in UEFI boot....