Chosen Solution I just recently got 2 phone screens replaced at my local mall cell phone repair store. I received the phone back and was happy with it, but after i left and started using it i noticed that on both iphones (mine and my sisters) the text at the top of the screen (battery, time, carrier, etc…) looks like it has been moved up and is smushed at the top of the screen?...
Chosen Solution Stacked unit. I have taken apart the bottom (can’t take off the top since stacked). I can see it leaks while it’s spinning the water around during a wash. If I run the Affresh clean, it won’t leak during fill, nor drain, but leaks when it’s splashing the water around. I cannot see where it’s coming from, as I can see water dribbling down somewhere from the top of the drum....
Chosen Solution Have an iPhone 7 and thinking about getting extended capacity battery but I know some are just fakes, but is there really one that has higher capacity and it doesn’t have a lower cycle life? MobileSentrix and InjuredGadgets are reputable companies that sell extended capacity batteries. There was an interesting discussion about this about 6 months ago (Opinions What do you guys think of extended capacity batteries) so you should link to the Q&A and read up on it....
Chosen Solution After separating the glass screen from the digitizer and cleaning up I need to glue the New glass screen to the old LCD. I saw a video on YouTube that was made in Russia where a person used a glue to fuse the two parts together. She poured the glue on the LCD and put the glass screen on it. That seems to be a good way to bond the two together....
Chosen Solution What happens if I loose my grounding finger for my camera on an iPhone 4 Verizon. Dose it effect anything major? It’s not a critical part however you may notice greater noise on the picture when shooting in low light environment.
Chosen Solution So a customer gave me an iPhone 7 without Haptic Feedback. I bought and installed a new Taptic Engine but it still doesnt work. After that i swapped the Lightning Connector for a new one, because thats where the Taptic Engine plugs into. Still no Haptic Feedback. The phone is NOT water damaged and never went into repair before. What could be the problem? I know it’s hard for people with no access to known good parts and housings and I know you have replaced the taptic and the dock....
Chosen Solution iMac 2015, 8Gb, 1TB. Running Mac OS X Mojave. Used iFixit hard drive upgrade kit with Samsung 860 Evo 1TB SSD. Opened in 10 minutes, disk pout in 5. Toughest bit was getting the new adhesive strips fitted - took ages to line up! Now the tough bit. I had cloned the drive, had to format as APFS, as when I did it as Mac OS Extended (Journaled) didn’t boot, and so I had to redo the clone....
Chosen Solution I bought reserved iPad on launch day. I guess when I used this first time for a week, its battery life was good. Now I found out my iPad battery drains so fast. Even when I dont use wifi and bluetooth and turn off iPad screen, battery reduces about some percentages. And I found there are some heat upper side and left side not on LCD screen, near screen even while not using it....
Chosen Solution hey guys I’m trying to find a site online that i can buy a new replacement home button for my iphone 8 plus. Cause the home button stuck and not working please help :( iPhone 8 home button is never “stuck”, it is a solid piece to begin with. It is not working due to failure to detect your finger, or internal fault to prevent it from working at all....
Chosen Solution dell optiplex 520 with plantium d 945 processor , i want to update new processor , i want the list of processors list plse help @sarla_raju5353 we would need to know more specifics about your motherboard. This should be a relative old computer with limited processor upgrade potential. Originally the OptiPlex GX520 supports Intel® Pentium® 4 (Prescott) 5xx series, Pentium 4 Celeron® 3xx series processors and Intel Pentium D (Smithfield) 8xx series processors....
Chosen Solution I recently bought a used Dell U2413 monitor. All were working fine within my initial use, though a few days after, the monitor started to turn itself off randomly within half an hour to an hour of use– no power led, and would turn back on after a couple of minutes. After some troubleshooting, it appears that the power supply, or something within the power supply circuit is overheating, thus causing the monitor to turn off....
Chosen Solution I have an old 2nd Gen Ipod Shuffle. It charges, connects and plays perfectly still. Although, after 5-6 hours of playing it will shut down mid song and flash red several times, followed by no light and a dead Ipod. After waiting a few hours without recharging it will play normally. Any help is appreciated. Thanks Nick It could be your battery is going bad or the sensor related to the battery....
Chosen Solution OK, so I dropped an iphone 6 and the screen was a mess (both the glass and the LCD). The screen protudes a little on one side due to a slight bend in the frame. After a new screen, which works perfectly, I’m now finding that the device turns itself off after 5mins except when it is connected to a power source. Has the repair guy done something wrong?...
Chosen Solution macbook pro, 15 retina A1398, suddenly stoped dead, battery was at ~50%, would not turn on, trying resetting g, no good. When plugged to power, mag safe led turns green and stays green, battery not charging. Related question: removed ssd, how do I read it on a working mac? Sadly there is no means to remove the storage chips from your system to recover the data on them....
Chosen Solution After replacing the iPhone 5 screen with iFixit kit the display turns off when I put the phone back together. The screen works fine if the iPhone is open. But, no matter how I adjust the display ribbon cables or reconnect them I still have the same problem. Anyone have an idea to fix this problem? Hi, Possible faulty part, get them to send out a replacement, if it does the same, then it is a different hardware issue....
Chosen Solution I have two Mac Mini, late 2012’s to upgrade. One has an empty Upper bay and the other has an empty lower bay. According to some other sites there is a difference in the installs, and possibly in the parts kits. Does the current kit work with either bay? Thanks, Dave You are correct! There are two different SATA ribbon cables (one for each bay). Please take both out (keeping clear which came from which system)....
Chosen Solution So I dropped my Nokia Lumia 710 while it had the D3O cover, happened multiple times before, I loved the integrity of this thing, they’re really bullet proof, but I guess it’s number was up, is there any method of figuring out what went wrong? The phone was fine before I dropped it. Afterward it came on, I clicked the power button, saw my home screen, then after that it refused....
Chosen Solution I’m experiencing Vertical flickering lines. And according to my research its a Tcon board issue. I’m just planning to buy an external monitor for an alternative. Is it a good idea? Or it will just be useless because external monitors will be affected by the tcon issue aswell? whats the function of tcon board by the way? The T-CON board is part of the display, it converts the signal into what the LCD panel needs to create the image....
Chosen Solution I’m trying to diagnose a FaceTime HD camera that isn’t detected under OS X system profiler after a screen replacement. I’ve tried resetting NVRAM, SMC, and disk repair to no avail. However, the ambient light sensor works great, and it is my understanding that it’s located on the same PCB as the camera. Are the camera and ambient light sensor connected via the same cable? I’ve never really encountered a nonworking FaceTime camera especially on a brand new OEM display so I’m not sure if this is an obvious fix....
Chosen Solution Hey, may name is James Nic , leaving in Australia, Last night I bought a new HP printer and now being a non-technical person I need technical assistance in installing Printer on my Windows. I have been trying since last night, but still could not resolve that. Please suggest me the best solution so, that I can install and operate my HP printer easily. Hi James, I am Charlie Cooper from Australia....
