Posts

Chosen Solution Hello this is Emre - Apple Technical Service owner, I have my wife’s A1707 macbook pro and ordered a battery 3 days ago. Changed it very well (I don’t think that I have destroyed anywhere that time) but then I realised that macbook started to work so slow and did diagnostic and gave me PFM006 & PPN001 as everyone gets. But this didnt mean anything for me. So kept searching and found your video on youtube which shows kindly similiar problem....

Chosen Solution Hi, I have a 32" samsung le32a456c2d , after entering service manual and changing some options, all what i have now is a black screen, i tried everything nothing works until i found that unbricking my EEPROM ( RESET) may do the job and my TV could work again, the problem is that i searched everywhere on the web and checked the MB multiple times i can’t identify the EEPROM i can provide pictures if needed ....

Chosen Solution What do i have to remove to get at my oil pressure sensor ckat, I believe the oil pressure sending unit is located by the oil filter, not sure but may require large deep socket to remove or open end wrench, some times these sensors require a specialty socket, you will be able to tell once you have a look. Check attached link for pic. of sensor so you will know what your looking for....

Chosen Solution My puppy got hold of my new Alcatel Onetouch 20.45 phone that I’d had for only 4 days & has cracked the screen where can I get a replacement screen from or will I need to buy another new phone?

Chosen Solution Hello, my brother broke my Nintendo DS Lite hinge.In the hinge there is a ribbon wire that is orange and has wires going through it. This ripped and now when I turn on my DS, the bottom screen just flashes and goes back off. Please help. Guy, check on where the ribbon cable comes from. Use these guides Nintendo DS Lite Repair to disassemble your DS. Post an image of your damaged wire and the location....

Chosen Solution The switch lite that arrived YESTERDAY sounds like something is caught in the fan. How do I get to it to make sure it’s clear? Hi, If it only arrived yesterday it appears that it is new, is this correct? And as it is a newly released model also either way it should still be covered by the manufacturer’s warranty, which may be up to 2 years depending on your location....

Chosen Solution @mayer or @oldturkey03 Got this system in today. Heres the issue: When you first turn it on and it works fine. After a second boot (eg, reboot) it fails to boot after the startup chime. Works fine if you leave it unplugged for half an hour and then try. Heres what happens when you start it up a second time: LED 1 greenLED 2 greenLED 3 OffLED 4 RedLED 2 turns off Fans speed up and are cut off by shutdown....

Chosen Solution My customer’s iMac is not booting at all. When the power button is depressed, the optical drive makes a sound as it resets the optical part, diagnostic LEDs 1, 2 and 3 light up (the LCD is currently disconnected), and nothing else happens. The hard drive does not spin up, no fans start, nothing. I’ve tried starting it in Firewire target mode but that doesn’t work. I tried resetting the PRAM and the SMC, but no results....

Chosen Solution If the vibrator has stopped working in my iPhone, and I’ve powercycled and restored (and double checked the settings…), to no avail, can I assume that I need to replace the vibrator module? Or could it be a different hardware issue? Thanks Also, is there a big difference between the OEM vibrator modules (avail for $40) and the non-OEM (avail for $6)? Does iFixit have a recommended source?...

Chosen Solution Various videos online show people just prying the back of the phone off with a spudger. I assumed I would need to use a heat gun or iopener or something similar to melt the adhesive first? Just want to make sure I do this right I’d highly recommend it, since it not only makes the separation of the screen easier, but also prevents the breaking of the screen an other components from using too much force....

Chosen Solution Hello, I managed in breaking off the battery connector screw head. Luckily I got the screw out. Where can I get a new screw ? Thank you. Check a hardware store, repair shop, or hobby store. Tell them you are looking for a 2.5 mm Phillips #00 screw for your iPhone. They should be able to hook you up. Hope this helps! *A hardware store, on second thought, probably won’t have Phillips #00, so a repair shop or hobby shop would be your best bet....

Chosen Solution I want to change the back cover of the phone because the lens is all tainted and it looks all blurry. Apparently cannot be fixed. I haven’t changed it because I don’t wanna lose the waterproof feature, but I really miss taking photos with the camera. Does anybody know how to reseal it or even if it’s resealable? Now that it has been opened, I’m not sure you will ever regain 100% waterproof-ness on the phone....

Chosen Solution GE Over-the-stove Microwave JVM1950DR1CC Please help settle a marital fight. I tell my wife to turn on the microwave exhaust fan while cooking greasy items (bacon) in the microwave to send the greasy steam to the outside (vented to the outdoors). My dear wife claims that the microwave exhaust fan only expels the air from below the microwave oven; the stovetop and oven air only, and does nothing from the inside of the microwave....

Chosen Solution Hello everybody, can i downgrade my ssd from macbook pro 13" early 2015 to an ssd from an macbook pro 13" late 2013? The OWC SSD are compatible for both, but are “original” ssd from late 2013 also compatible to early 2015 model? Thanks for help! Update (05/25/2016) Thanks for help. I’ve bought a new SSD on eBay. Everything works again. See if these new flash dives are more in line with your budget: http://eshop....

Chosen Solution I have a Kenmore electric dryer (HE4 actually) that won’t heat up. Below is what I’ve done to troubleshoot: Replaced the heating element Replaced the thermal cut out, thermostat and thermal fuseChecked the voltage at the circuit breaker. . .getting 240 VAC and 120 VAC on each one.Checked the voltage at the wall plug. . .again 240 VAC and 120 VAC were good.Checked the voltage on the terminal board on the back of the dryer....

Chosen Solution My earphones will only work if I hold them into the phone jack. I’ve tested te headphones and checked the connector which is fine. Seems to be as if something is pushing the jack out but I’ve checked and the socket is clear. My watrenty ran out in December so they won’t help me. If I hold the jack in for a few minutes sometimes it will stop in on it’s own but there is clearly a problem....

Chosen Solution 4gb you can try several things to unlock your iPod connect your iPod to the first computer you sync’ed it to. Open iTunes, then disconnect your iPod. Your iPod should be unlocked now if you don’t mind erasing all the contents of your iPod, then restore your iPod. This will remove the passcode lock and restore your iPod to original factory condition. I hear that if your iPod supports disk mode - i....

Chosen Solution If i start any app that uses gps it only gives me approximate position. Some apps say NO GPS. i took it to a shop here in Cape town. But the techician insists there is nothing wrong. The position is just jumping. He claims that cell phones does not have GPS modules but uses ONLY networks and cell phone towers to locate position. Is that true ?? Of course not true....

Chosen Solution From looking at the repair guides for the Wallstreet, Lombard and Pismo PowerBook G3s I realize that the Lombard, and subsequently the Pismo models have different hard drive brackets from the Wallstreet model. I am wondering, whether the later-revision brackets can be used in the Wallstreet PowerBook G3. On eBay, I have purchased a Wallstreet PowerBook G3 without hard drive or bracket. I also found a bracket there that looks like its from a Lombard or Pismo PowerBook....

Chosen Solution So, I was replacing the iphone 5s screen and somehow I am now stuck in the display connect to itunes. I have selected the update and restore options a dozens times each. All it does it load the white screen with apple logo then go back to connect to itunes screen. I cant hard reset as the home button is not functioning. How do I get around this? The error message that appears is THERE IS A PROBLEM WITH IPHONE THAT REQUIRES A RESET OR RESTORE"...