Chosen Solution How do I reset my password Hello Madison Just like gatewaynomad said to make the instruction easier we will need to know what version of Windows your laptop is running. Saying that resetting the Offline Windows password isn’t to hard. Note that I said Offline password. that is because if you are using Windows 8 and above you can log in using your Microsoft Account password or any other online account password....
Chosen Solution I recently tried to restore an iPhone 6s to factory and it loaded up to this screen where it says enter passcode and then confirm passcode and then tries to restore data and then goes into a disabled screen. Btw I do not need to keep the data. Thanks Download 3utool and try flashing.
Chosen Solution My son threw the tab on the floor in rage and the whole screen cracked into bits but the touch was still working.. Before this my phone too cracked and I gave it to renew the screen of it.. But after I renewed it all the apps and files were not there it was like a new one with only pre-installed apps, now I gave my tab for a renewal....
Chosen Solution Disks have gotten loose in this 5-disk carousel Toshiba SD-3205 DVD Video Player. The drawer won’t open and they’re some of my favorite disks. Do I have to take it apart? If so, how? Is the player dead or does it power on ? if it powers on - just try one thing - press the eject button and “tap” with your fingers on the top of the player) (could be a little harder, but not THAT hard ;-) ) sometimes the magnet wont release the drawer (had this on a few cd drives in the past) - if that wont help....
Chosen Solution Iphone6 Have a iphone 6 that I replaced the screen, charging port and battery all in one go and then tested the screen. Was working fine until it periodically froze and is now constantly frozen. I have tried a different display and it initially works but freezes again Plzzz help URGENT. Thank you Hi Sony, why did you change the screen, battery and port in the first place (drop, water, prior repair)?...
Chosen Solution Hello… I’ve been replacing iPhone displays since the 2G. This is my first time replacing an iPhone 5 display assembly. Everything seemed right until two days after the replacement. The screen started acting on its own, it acts randomly. Makes calls, add contacts, starts swaping left right, etc. Also sometimes it goes unresposive and i have to touch it a lot of times until it works. I want to know if I did something wrong during replacement, or how can I fix this?...
Chosen Solution Several days ago in the morning my kindle stopped reacting on power button. It shows only a screensaver. I had used it in the previous evening. I didn’t drop it, it has not any damages. I tried to charge it all the day - it didn’t help. I tried to reset it(using power button and switch on mother board) - didn’t help. I suppose that it is working but doesn’t show a picture....
Chosen Solution Hello, I started recently with fixing electronics and I came across a problem with an iPhone Xs Max which I tried to fix. When I bought the iPhone it had a cracked back and a bad speaker. So I started with removing the motherboard and screen and than I heated the back. I think I heated it way to much because it wasnt turning on, so I replaced the battery because it started to smoke…....
Chosen Solution I need to replace them they want to work but can’t. William Johnson, there are a few good videos that may help you. This one is very good, this person has two videos that are very informative as well. Hope this helps, good luck.
Chosen Solution Error code LOC. It won’t start and just flashes LOC @xxxxxxxx sounds like your dryer’s controls are locked. Try this first:" Press and hold for 3 seconds the “Control Lock/Unlock” button on the control panel to lock the control panel. Listen for a double beep and observe the “Control Lock” status light is lit when the control lock is in effect. Press and hold for 3 seconds the “Control Lock/Unlock” button on the control panel to unlock the control panel....
Chosen Solution So I have a second phone (Huawei p10 lite, but it was not on the list, anyway almost same with p9 lite) and I accidentaly dropped it in water. It kinda went dead for some days, so after 2 weeks of letting it dry, I boot it up and everything is fine, except it cannot charge. I replaced both the battery and the usb charging port, but the phone still not charging....
Chosen Solution I have an iPhone 7 that starts up directly to the restore screen. It is a model 1660. Its not bent or severely damaged. Every time I restore it, it gets to the Apple logo and bar screen then goes back to the restore screen and gives the error on itunes. I’ve tried restoring on windows and mac and used multiple cables. I have also tried using 3uTools but it doesn’t restore through there either....
Chosen Solution Hi everyone! I have a problem with my laptop. Since today it freezes out of nowhere and i have to shut it Down only from the Button. When I turn it on again i get this message “ pci lan realtek pxe bo3 d00” What do I need to do? I Did the test on my harddrive and Its 100% and i also got into BIOS where lan is enabled; realtek is on the last position and the HDD is on 1st position ....
Chosen Solution Its a small crack in the screen , it will light up but will have lines throughout the whole screen. Macbook pro 2015 retina display , A1502 Just to give you a better idea of your cost, I generally charge the cost of the part plus $200 to do this one. It is a difficult replacement and very exacting. Well you posted on ifixit.com, so I’d say the estimated cost is: MacBook Pro 13" Retina (Early 2015) Display Assembly plus tax/shipping plus labour (ie....
Chosen Solution How to solve plssss my j7 flickers when on low light how to fix help me pls should i replace the lcd or their is other things to replaced or it just needs something to be solved ? @kobexkyrie seems to be a very common issues with this model. It is the backlight that is flickering at higher/lower power demands. Could be filter or power IC as well as the Amoled....
Chosen Solution I need the 2 gaskets that are in the blades assy . How can i ? Hi, Here is a link for the seals, click on page A/B. Here is one seal part #4 on page B Scroll down to B-4 to view the part. Here is the other seal part #7 on page A Scroll down to A-7 to view the part. Hopefully this is of some help....
Chosen Solution First and foremost- I did all the wrong things. I know this now. Please be kind in pointing out the things I’ve done wrong here. I am a freelance writer. I work a lot in cafes. A full 12oz latte got side swiped and spilled onto my MacBook Air. I immediately picked it up and flipped it- though I neglected to turn it off (I know I know). I eventually did after reading that it was stupid of me to keep it on....
Chosen Solution Basically my xbox turns on and shows a green light but does nothing. Nothing come on the screen, the pad turns on but doesn’t respond. and when you unplug the pad and reattach plug it in it doesn’t have power to it (wired pad). Is it the same problem as the red ring or something worse? It sounds like it’s not booting correctly… I would try these steps but if the don’t work the system may just be “bricked” Step one: inshore that the hdmi cable is not faulty/plugged in correctly with no problems (if the Xbox does not detect a output source it will not boot) Step two: try to reinstall the os, you can do this with a USB by going to… http://download....
Chosen Solution For some reasons the haptic feedback feature of my macbook trackpad is gone and also the battery drained out completely from 80% in 1 day while sleeping. I have been looking for a way to fix it but have not had an luck. I have tried: SMC reset extended SMC reset NVRAM reset I was not able to even power the laptop on previously (extended SMC reset has fixed this) haptic and battery drain issue are still there....
Chosen Solution compression is 145 -150 on all cylinders-fuel pressure 58-tested coil by switching it with 3 still misfire on 1 still-checked fuel injector harness with nod light good-replaced plugs still misses on 1-replaced crank sensor and miss continues-checked for intake leaks with propane nothing found engine light flashes- scan shows p301 -shut engine off restart its fine until second acceleration and #1 misses again -car does have exhaust system leak help!...
