Posts

Chosen Solution During spins heavier loads seem to be better than usual. After reading the various possibilities on this site we got a new coupler thinking it may have been slipping. This seemed OK but replaced it while apart. Agitator seems to work fine but drum seems to be slipping actually in start up light resistance we can almost stop the drum. Any thoughts @e37027 this behavior could be caused by a bad clutch....

Chosen Solution Here is a logic board removal and hopefully repair under way, but it is looking different under the hood, than shown in the logic board removal guide. It appears that I have a discreet GPU card present in my configuration. Now in order to fix my Error as per message above , before complete black out, I was hoping to follow this guys guide: “Before the black screen I did the hardware test....

Chosen Solution i use mac mini mid 2010 and recently tried installing high sierra but failed updating. Now when i open my macmini it shows installizing but after few minutes it says error occurred installing macos. I use wiressless keyboard for my macmini so i am not able to press any buttons. I went to the apple service center but they said it would cost me $40 and all my files would be removed....

Chosen Solution New Batteries but sound is not loud enough to hear story. The speaker may be burning out or a wire may be unsoldered. Take apart the toy, examine all wires and there connected spots, especially the speaker. If the speaker crackles or smells, its slowly burning out and it needs to be replaced.

Chosen Solution Hi… I am sorry if this is redundant but I am beating my head against the wall on this. My xbox one warranty expired in june and I had never used the optical drive until 2 weeks ago. If you put in a disk, nothing happened. I went through all the MS troubleshooting steps with no success. So I ordered a new drive, got it in and swapped the daughter boards....

Chosen Solution So the left side of my screen is displaying strange colours and strange flickering. It’s as though anything going on that side of the screen somehow changes colour, and weird flickering appears especially when dark colours are displayed. Fiddling with connectors has brought no joy. I’ve read about T-con issues…am I another victim? This came up out of nowhere and for a while it seemed to change with the screen angle which led me to believe it might be similar to Flexgate....

Chosen Solution locked out of android Trio Stealth Pro 9.7" 4.0 operating It looks like your only options are to remember the password or reset to factory defaults. Try to setup the same environment/situation you were in when you changed it. Being in the location, similar scents, etc can assist in memory. Try to remember what you were doing, what you were thinking about, who you talked to at the time....

Chosen Solution Is the battery a Genuine Lg battery? because cheap fake ones don’t really work. Is it sold by ifixit or its a third party selling on your site? Thanks iFixit does not outsource their sales LG V30 Battery

Chosen Solution { "build" : "iPhone OS 13.3.1 (17D50)", "product" : "iPhone12,1", "kernel" : "Darwin Kernel Version 19.3.0: Thu Jan 9 21:11:10 PST 2020; root:xnu-6153.82.3~1\/RELEASE_ARM64_T8030", "incident" : "CC246051-99DA-45F9-9DEF-D8FDBC54395E", "crashReporterKey" : "dc4115b396f7c8ed2afc5c94c94975d1950abd68", "date" : "2021-07-13 13:05:21.99 -0700", "panicString" : "panic(cpu 2 caller 0xfffffff029c78480): userspace watchdog timeout: no successful checkins from com.apple.thermalmonitord since load\nservice returned not alive with context : is_alive_func returned unhealthy : current 3fe3bfffffffffff, mask 1ffffffffffff, expected 1ffffffffffff\nservice: com.apple.backboardd,total successful checkins since load (180 seconds ago): 19, last successful checkin: 0 seconds ago\nservice: com....

Chosen Solution I’m replacing the (cracked) screen on my iPhone SE, and the home button that I peeled off of my old screen won’t fit in the hole of the new screen. I’ve tried enough times and enough ways that I’m confident I’m not just sticking it in sideways. The button fits back into the old screen just fine (with no extra effort). I held the screens up to each other and looked through the cracked screen’s hole to see if the new hole is smaller....

Chosen Solution my rj45 cable is wrong, how can i check what problem it is? Update which brand cable tester is better? Most brands accomplish the goal some are more functional than others but if you just want to test the cable to see if its OK a multimeter and a couple of pins or needles will do, tape the pins to the end of your multimeter leads set the meter to ohms and make sure you have continuity then carefully touch the ends looking for matching colors....

Chosen Solution The button on my Motorola Droid RAZR suddenly stopped working. When I press it, it doesn’t turn the screen on or off and it won’t pop up with the power off option for my phone. If I let my screen turn off or go into “sleep,” I can’t get my screen to come on unless I plug it into a charger, but the button is useless. Can it be fixed?...

Chosen Solution So there’s this offshore oil rig here, and it won’t stop leaking. Anyone have any suggestions? Already tried putting a pipe on it, didn’t work. And tried clogging it up with tires and golf balls, didn’t work. Now trying to pump fluids and heavy mud into it to stop the flow, but no idea if that will work. Any suggestions are welcome as this is becoming a major problem....

Chosen Solution I tried the hairdryer trick but it still won’t charge. I stopped charging it for a couple hours and it shows the red battery sign and it goes black again, I charged it again and it still won’t charge. How can i fix this???? Hi Emily Shane Sound like the battery has been worn out or having issues. I had several iphone4 having this issues. Replacement of battery works....

Chosen Solution I have a 2013 Macbook Air and I bought a logicboard that was either exactly what I had or close. (I couldn’t remember the precise ghz or RAM.) Installed it with the help of ifixit, seemed fine, but when I try to boot up, I get a flashing folder with a question mark. I can’t boot into safe mode and select a start-up disk, my only option is Internet Recovery… Once I get to those options and I go to Repair, I am able to see my desk and verify it....

Chosen Solution I have an Acer Aspire r5-471T. I think my graphics card may have messed up. My screen won’t turn on but the led indicators do. I tried the battery reset and that did not help. I know my model has integrated graphics (intel 520) but I don’t know how to fix this problem. Hi @saulsadiq12 , Do you get the “Acer splash screen’ on startup before Windows starts to load?...

Chosen Solution I got some water damage under my screen and was wondering if the screen from Macbook Pro 2016-2017 fits on my 2018 model (A1989) because i found screens only for the older ones available to buy. Thanks It does not appear to be compatible: http://www.powerbookmedic.com/MacBook-Pr…

Chosen Solution Our water recently froze and once we got it unfroze the washer started running fine then just before the rinse cycle it started flashing F then H and won’t finish draning or spinning. When a Kenmore washer displays the F/H error, it means the washer isn’t filling with water, possibly due to defective water supply valves, siphon problems or a frozen fill line. Check your lines are open and that there isnt some sort of other blockage or damage from the frozen water lines....

Chosen Solution Hello everybody ( sorry for my english i’m french ) I just fix a macbook but i have a big problem the Connector for FAN is broken and when i try to soldering one point is not ok the three other is good … so the fan work but allways at the same speed real problem because it’s the highest speed and it’s make SOME NOISE! So i need to now if anybody know an alternative way to solder the fan on the logic board ( alternative point …....

Chosen Solution Hi All, I have now changed out the WD 4 TB DH to a 1 TB SSD. I have left the temperature sensor cable unplugged and lying loose inside the machine. I had iStat menu control installed since I changed the original drive to the WD 4TB and it worked perfectly looking after the fans. Problem I have now is the fan is running loudly, doesn’t sound like it is running at full, but its still noisy....