Chosen Solution Help… so i was at school and i fell over and my bag was in my bag and i forgot about it then i went to go get it out and turn it on and it turned on but the screen didn’t and i can still hear it when i get a notification just the screen is cracked and it wont turn on the display. What happened? How do i get it fixed?...
Chosen Solution My home button disabled after a battery replacement, with the error message “Unable to activate Touch ID” displayed. The phone functions after entering the passcode, however home button still disabled. Please help me to help you come up with the fix. Thanks, Chris It’s possible that the Home Button connector is improperly seated or you may have damaged the Home Button flex or its connector while replacing the battery....
Chosen Solution I just replaced the cracked screen on my ipad3. It turned on okay but the home screen is not displaying correctly. There is a thick black line down the middle of the screen. One half of the screen is displaying fine and the other half is distorted. Icons seem to be all working. I’ve check my connections a few times and all seem to be inserted correctly. I can figure out what is wrong....
Chosen Solution This is my first time replacing the housing on an iPhone 7. I have previously changed housings on iPhone 6s and I usually take the silver ring around the charging port from the old phone and put it into the new one. However this iPhone 7 that I have has a dent in the black ring surrounding the charger port. I was wondering what this part is called and how/where I could find a replacement....
Chosen Solution My wife closed the device without the bottom lid and after 3 seconds the device shot down, stuck bowl, making clicking noise and code c208 pop up. I dried the device, put it back in place, got out the bowl manually, and put it back into the place. Plugged in, but c208 shows all the time. Official troubleshooting guide says it’s locking mechanism: repair when the error continues to appear....
Chosen Solution Lenovo 20NF-0000GE Something fell on the top of the laptop and broke the display, now I want to replace it but I don’t know how to take the Display-assembly apart and don’t want to break something. Hi, Here’s the hardware maintenance manual for the laptop. Go to p.84 to view the necessary pre-requisite steps and then the procedure to remove the LCD panel. Here’s a link to the parts for the laptop....
Chosen Solution I’ve had this laptop for a little over a year and both of the hinges for the screen have completely broken, I know many people who own the same model have had the same issue but I can’t seem to find a solution. :( Another problem I have along with the hinges is that the palm rest on the laptop has also become loose and is coming apart along with the charging port that isn’t able to charge anymore....
Chosen Solution What do I need for tools and parts to do a complete oil change and tune-up on a 2004 Ford Taurus SES I need videos and pictures and step by step guides on this please @oceaneyes49 that’s a tall order. Common things that get done are : Replace spark plugs and wires Replace or clean PCV Clean the MAF with MAF cleaner Replace fuel filter Replace air filter Replace oil and oil filter This site will help you with most of the stuff
Chosen Solution My passenger side door is stuck, how am I suppose to get the panel off if it’s stuck? i am a mechanic and this is one of the most tricky things to do depending on the problem. all you can do is move the seat as far out of the way as you can, get as many retainer screws as you can see out, and try to gain enough room to get your hand between the door panel and the door, and try to get on a lock rod or the door latch itself....
Chosen Solution Change the original 4GB HDD of this model to an 80GB one. But I can’t install the system to use it again. I light it and the “?” Icon is flashing. Download and burn discs with MacOs 9, 8 and I can’t make it boot from the CD. As I read it was to keep the letter “c” after the ignition but does nothing. I would greatly appreciate your help....
Chosen Solution I also have a dead MacBook Pro retina early 2015. (not liquid damage) When plug in the MagSafe charger it goes from green to orange. System completely dead, no fan spinning, no chime… Nothing! Actually, that is exactly what the mag-safe adapter does when it charges a battery. It is green when first plugged in, then if it needs it it starts charging the battery and changes to orange....
Chosen Solution Here’s what my black MacBook C2D 2.0 is doing: When it boots up I see a brief glimpse of the gray screen then it goes black, next, I see a brief glimpse of the blue screen and the “Starting OS X” progress bar then it goes black again never to return. If I hook up an external display everything but the iSight works perfectly. In System Profiler, it says no display is connected....
Chosen Solution When I opened my 5S, I accidentally lose the metal shield that holds the Touch ID cable to the motherboard. When I put everything back into place and turn the phone on, Touch ID no longer works. The home button was fine. I didn’t replace any components. So is that metal bracket required for Touch ID to work? Shouldn’t need the plate for the Touch ID to work no....
Chosen Solution My wired doorbell will ring occasionally by itself. Then the electronic part will hum continuously. Do I just need to replace the entire unit? It’s old. Is there a trick to doing this? Steve Amerson, check your door bell switches that are on your door :) see if those have loose contacts. If you want to change your doorbell, it would be a straight forward exchange, but the symptoms you describe are more that of loose contacts....
Chosen Solution I got my Hyundai Accent 1998 car that when I open the driver door ONLY the dome light doesn’t turn on. However when I have my headlights turn on and open the door a small alarm will turn on that I have my headlights turned on so my switch is working partially. How can i fix this problem please ? Hi, Check that the driver’s door switch is not corroded....
Chosen Solution I get code error number 3501 and need to know how to correct it margo, info supplied by Kodak, Error code 3501 means, Printer access door open. To fix error, close the printer access door. If the error continues after you close the printer access door, power cycle the printer: -Turn off the power (press the On/Off button on the printer). -Unplug the printer power cord from the back of the printer....
Chosen Solution I have a Micromax A110Q Canvas 2 Plus phone whenever I start the phone the canvas word comes on the screen as if it is starting but it gets stuck to that only & my phone doesn’t start. The display remains the same i.e. canvas written on the screen. nothing happens after this. Kindly Help. Regards, Ratan Singh. singh.ratan012@gmail.com Hi, You need to hard reset your phone. Before you do this make sure that the battery is fully charged....
Chosen Solution Didn’t happen at first but soon enough the fan started to create a noise that one would assume is made when the fan blade collides with something in the setup. I’ve tried opening it up but unfortunately the fan blades itself are covered and I cant even get to it with toothpicks. Any help or ideas or help? jaffri.bilal , Remove the fan link 1 and 2 show’s how....
Chosen Solution Hi, about 1 month ago I spilled a little bit of coke on my MacBook Air 2017. I turned it off really quick and cleaned it with isopropylic alcohol and a tooth brush. After doing this, it turned on again, but it worked really slow, with the fan working really loud. Apple diagnostics gave error PFM006 and a camera error. Again I proceeded to clean it again, but more in detail....
Chosen Solution I have a Surface Pro3 that was approximately destroyed. I managed to rescue the hard drive, but need to connect to it. Is there an adapter that will let me treat it like a regular SATA SSD? They do not use hard drive. They use solid state drives. They use a mSATA interface. So you will need a mSATA to SATA adapter so you can plug it into a computer....
