Chosen Solution I dropped my chromebook and when I went to pick it up the screen had a black border with a white screen. I turned it off and when it turned on the screen was still white and there was only black in the corners of the screen but they started to expand until the border came back. After a minute the screen began to show black lines and started to fade to black....
Chosen Solution Hi my friends iphone 4 was dropped in water for a few seconds and would not work properly, I have replace a number of parts including the loudspeaker, microphone and earpiece speaker. when he tries to make calls it goes straight to loudspeaker and there is no communication between phone calls, there isn’t even static or crackling. I would like to know which part of the motherboard controls phone calls and are any of the these parts replaceable?...
Chosen Solution While emergency light on cruise control will not engage Enoch Vinnegar Jr there are a few possibilities. One being a bad parking brake switch or a bad switch in your brake fluid reservoir switch. This series has an issue with the wiring to the instrument cluster as well. Check on here for that. The image will show you where the parking brake switch is located and this one...
Chosen Solution I like to play Furby, but I saw a man named Furby Boom, it Furby there a difference? Valentine’s Day is coming soon, I should send him a furby toy or send a nici plush toys forest brothers series to him. From the Furby Wiki: A Furby (plural Furbys or Furbies) is an electronic robotic toy resembling a hamster or owl-like creature which went through a period of being a “must-have” toy following its launch in the holiday season of 1998, with continual sales until 2000....
Chosen Solution Hello. So a good friend of my father, gave him his old J3 2016. He said that it had a problem. So my father gave it to me to take a look, and the phone appeared to be dead. No signs of life whatsoever. But when i plugged it to my charger, the phone make the classic Samsung charging sound! I left it to charge for hours and came back, but it was still dead....
Chosen Solution On my iPhone 5s, to works perfect for first 3/4 minutes of usage. Then it seddeny starts doing ghost clicks and non responsive. (I also see some vertical lines on display) Then I lock the device (turn off display), wait for 2 min Aprox. Unlock again and it works perfectly for next 2/3 minutes. As the cycle goes on. Is this a genuine bug or specially granted to me?...
Chosen Solution Hey there, i did several replacement jobs on an iphone 5. Everything worked fine so well, but after a recent lightning adapter replacement i did all my “standard-tests” and noticed tiny spots on pictures of the rear camera. Well, i thought i touched the camera during assembly and those spots are just fat (or something else). I opened the phone again, cleaned the camera and the glass, closed it....
Chosen Solution I have an AMD GPU r7 370 when i turn on the PC it shows my Assus post screen after it it goes black and the heat pipes on the graphics card are so hot, i need to know what to do and is it possible to fix it?? Hi @sicko The card also gets power from the PCIe slot as well. If you have a DMM (digital multimeter) and you know how to use it you can use the paperclip test to test the voltages from the PSU to make sure that they’re all OK....
Chosen Solution I am having a Macbook Pro Retina 11,1 ( Mid 2014) Model with 128 GB SSD right now and i want to upgrade my SSD to 500 GB. Can someone help me with the right SSD model for me to buy. Is the below product compatible with my mac ?https://www.amazon.com/gp/product/B00TGI… The drive you picked with not work on a Mac correctly. Here are the upgrade options currently available: https://eshop....
Chosen Solution Do you know how I can connect and print to a printer without wifi? If the printer is bluetooth compatible then that would be the route to go. However, most transferring of data requires wifi, but it’s worth looking into.
Chosen Solution Recently my ps4 started losing its hdmi signal. It still worked from time to time but then eventually the whole hdmi port came apart. I took the ps4 to ubreakifix and they said the hdmi being broken may have busted the motherboard and makes the system un repairable. It don’t make too much sense to me since it’s worked before with a messed up hdmi port. So can anybody give me an actual good explanation on what’s going on or what to do?...
Chosen Solution I bought a 2.5"" 500GB 7200 SATA HDD to replace the one in my Mac mini (Late 2009). Checked the DIY videos here and realised they were all for the previous model A1283 a.k.a. early 2009. Googled around and couldn’t find any DIY tutorial/specs for the later model. I wonder will there be any difference or surprise that will hinder my DIY operation? Thanks. They are almost identical. The only parts that changed, to my recollection, are the logic board/processor speed (as bramley computers stated), RAM size, HD size, and I believe bluetooth board (but don’t quote me on that one)....
Chosen Solution Even though the doors are secure the light is lit and because of it the warning beep is in affect Here’s how to remove and replace it: http://www.youtube.com/watch?v=T8tCS5zW5…
Chosen Solution My mom dropped my Xbox 360 and the disc tray will not go back in even when I hit the eject button. The right side is pushed out a little more than the left but I’ve tried just pushing on it but still no results. The right side is more loose as well. No videos or anything are showing me how to fix a stuck open disc tray. My disc tray cannot even slide in a little Please please help....
Chosen Solution I’ve recently replaced a broken screen on my iPhone SE (2016), the replacement is not an official iPhone screen but from an observational point of view and according to the website, it is of high quality. However, ever since I installed it, the earpiece of my phone sounds distorted, not only to myself but also to whoever I am on the phone to, which makes me think that the distortion is affecting my phones noice cancellation....
Chosen Solution I was disassembling my PS4 trying to find out why my disc drive isn’t accepting/ejecting discs. Upon disassembly, a small piece I’ve never seen before fell out. Does anyone know where this piece might go ? It goes under the motherboard on the heat sink. Found this topic as I had the same issue. Here is goes. Hugo
Chosen Solution The Question is simple, does the 2nd gen iPad mini digitizer fit the 3th gen iPad mini? The connector seems to be the same in the teardown, the size is the same. So the only problem can be: Is the Touch-ID button is the same size as the old home-button? Can anyone check this out? It would save a lot in repair cost to to the fact hat the digitizer are allready availible in good prices....
Chosen Solution Every thing with it seems to work fine except when I try to put a disc in it doesn’t suck it in as it should, was working fine and I didn’t use it for about a month and then, poof, it stopped working. I’ve taken it apart and there don’t seem to be any visual issues with it so that’s what I’m wondering about. can anyone help with this?...
Chosen Solution So I dropped my iPhone 6s about 3 feet, it literally slipped out of my pocket randomly & landed screen up (ive got it in an otterbox defender) I figured it was fine, dropped it many times and far worse before.. But then I tried using it, and I couldnt hear the speaker, or the heaphone jack, and there was no haptics like before, and then I was near 20% charge and tried to plug it in to charge… no charge light, at all… I’ve got some knowledge in iPhone repair & skills to open it up & swap out parts, I did the battery replacement on it 4 months ago without a hitch....
Chosen Solution == Model Number: n9132 == I dropped my phone out of my pocket one day on the floor and since then, it wouldn’t respond to my finger. The volume and power button works, even the charger. But The Home screen and back buttons don’t work anymore. Its just showing the lock screen and not responding to my fingers at all, screen isn’t dirty either. Things i tried/looked up to do: [x] -unhooked and snapped back into place the ribbon connectors (seen people say it worked but not for me, i had to get to one that was hard to reach due to a stripped screw but managed to get to it....
