Posts

Chosen Solution I wanted to replace the hard drive on the Mac min A1347. The original hard drive is a Hitachi 500GB 2.5inch HDD: 5K500 B-500 C P/N H2T500854S SATA which has only 2 sets of pins on the connector I ordered a replacement hard drive which is a Toshiba 500GB 5400 RPM 2.5 inch hard drive Part#IF107-060-1 which has 3 sets of pins on the connector and the original cable will not fit tightly since the cable has only 2 connections....

Chosen Solution I recently replaced the power button on my iPad mini 2 LTE, and in the process tore the cable connected to the right cellular antenna. and I was wondering if it was possible for the cellular functions of the iPad to still work with only one antenna? Thanks! Please specify which connector is broken.

Chosen Solution I just moved to Germany from the US and brought a Samsung BD-F5900 blu ray plater with me. The device clearly states its power requirements are 60hz/110v, but so many other models are being discovered to have shipped with universal power supplies despite such markings. I was hoping to find out if the BD-F5900 is such a device or how I might go about finding out short of just rolling the dice and plugging it in....

Chosen Solution hi there i want to fix my iphone by myself anyone can help me to pin point the real problem i drop my phone and the screen show flickering green and black display?the screen dont have crack nor scratch see image, now i want to know which the real damage part on my phone? logic board or the screen? thanks and i appreciate all your help. It’s hard to say if the logic board has become faulty before trying a replacement screen which would most likely solve the problem....

Chosen Solution I have a Sears Kenmore 80 Series Gas Dryer (Model 110.72822101) that dries only when it feels like it. Since it’s over 25 years old, it doesn’t owe me a thing. However, I think it’s probably something simple to fix. I watched through the hole in the front, and this is what happens: 10 secs after I push Start, the igniter glows for about 10 secs and then the flame catches....

Chosen Solution This DSI was bought in December. Yesterday my daughter said while playing her DSI she went to plug in the charger and it would not charge. She thought it was a problem with the actual charger cord. I took a look at it and when I plugged in the charger and then plugged the cord into wall, the DSI charge light would flash on and then off, and the power button would flash on and then off....

Chosen Solution The power light is on. turn it on and the blue arrow comes on for a few seconds. fan never starts and then it goes back to just the blue power on. no error lights. no light projected during the process. could it be a bad bulb? something I need to take in? Check the lamp connector cord contacts for oxidation

Chosen Solution Hi guys, I’m getting ready to order a new display, but wanted to clear up some final doubts before doing so. The internal display comes up completely black, and as a computer tech, I’ve tried everything I could find (PRAM reset, SMC, physically unplugging battery and display cable and replugging after a couple minutes), etc. Not even with a flashlight could you see any faint image on the internal display....

Chosen Solution I went through the forums, and answers from many experts/learner/diy guys…. My washer started showing f11. I ran the diagnostic test, so it goes from C0 to C1 . it runs for 15 -20 seconds approx in C1 and then throws F11 error. Seems like it cannot go to C2, but obvious. Opened CCU, checked all the connection, opened MCU checked all connection. Nothing i can find off… I dont want to replayce CCU or MCU and then have the same problem after that, instead buy new one right ?...

Chosen Solution Hi There, I was wondering if there will be any issues replacing the fan with one of same size but no (what I believe to be) heat sink? Whatever the Copper attachment is. The fan bearing went bad so now it shakes and makes a lot of noise when I use my laptop which is quite annoying, I deal with it by using headphones but can’t really take it out because of how loud it is....

Chosen Solution When I plugged my phone into charge in my car charger yesterday on the way to work it didn’t start to charge so I plugged it out and tried again. I then started to get a smell of electrical burning, I immediately plugged everything out. The phone then proceeded to loose charge incredibly quickly over the next couple of hours. I had actually been planning to switch out the battery that evening anyway because it wasn’t holding charge very well anymore regardless of this incident....

Chosen Solution get FH error as machine fills. checked flow switch, pressure switch and pump all seem ok. The repair was the replacement of the input water meter. Although it looked good a replacement solved the error @ivegot2beme as you probably already know the error code can come up with water supply valves that are not turned on, the inlet screens are clogged and the pump strainer/filter is clogged. It can also be caused by a bad drain pump motor....

Chosen Solution I accidentally pushed a piece of rubber approx 2” long from an oil change device into the crankcase of my John Deere riding mower and I can’t get it out. Will it damage the engine? I would drain the crankcase, fish the object out and put the oil back in.

Chosen Solution hello there, i have a macbook air 2008 model and i think my hard drive is bad, reason being is that about 2 days ago the drive just would not boot back to the os. it goes into disk utility. i took it to the apple store and they said that my computer is only available to 80gb but i do have a hs12yha 120gb pata drive, i saw that your website have a drive for 249 bucks but on amazon has a similar drive for 69....

Chosen Solution ok, here goes. A friend of mine purchased an upgrade harddrive for her Dell. The problem is dell sent here a 250gb hard drive which is SATA interface. we bought an SATA to IDE adapter but cant format or partition the drive. Is the drive too large? Do I have to set up different jumpers? I booted from the installation CD of Windows XP but while its installing drivers and such the installation halts and we get an error....

Chosen Solution A crack in the glass has blacked out the lower left portion of the screen. The photos produced are still fine, but framing is difficult and I can’t see any data in that part of the screen. I’ve ordered a replacement part but have never tried messing with something like this. Anyone been there? Thank you for answering! I think I’ll wait for your possible confirmation if that rongyuanxie part was the one you ordered and do the same....

Chosen Solution Early 2008 MacBook Pro, Model A1261, 4GB Ram, OSX Lion. My MacBook Pro has always run fairly warm but i have become concerned that it is running too hot and the fans are not automatically (it appears) cooling it sufficiently. Whether it needs cleaning inside or if something is not working to tell the fans to kick, I don’t know. Where should I start, I have no definitive direction from any of the forums I have found....

Chosen Solution I had replace the Lightning Connector Assembly and 2-3 days after, the home button is doesn’t work no click and return, no Touch ID function and the phone show me ‘can’t using touch id on this iPhone’ when I turn on the phone is the problem from a bad lightning connector assembly or other reason? Sometimes the ribbon cable on the display can get damaged. Open it up, check the ribbon cables on the screen to make sure they’re not torn or creased....

Chosen Solution Dropped my phone in a hot tub at 2 ft for 2-3 seconds. foolishly did not power off and dry out after. now phone states that it cannot activate touch ID. It doesn’t say anything about home button needs to be replaced like some error messages ive seen. Is there any troubleshooting I can do other than restore and check all the connections inside? Apple wont recalibrate the home button to the device since the moisture sensors reacted....

Chosen Solution air conditioning stopped working on Honda accord 2000,how come it still blows hot air with air condioner turned off and heat nob turned to lowest setting gsh. Check that the inline heater hose control valve is working properly, the valve restricts coolant flow when A/C is turned on and set to cold setting.There should be a cable connected to the arm on valve to open and close the valve have somebody switch your temp knob and observe the lever is working properly....