Chosen Solution last night I dropped my phone into the pool but I got it almost immediately after. I left it on my wireless charger over night because I didn’t think I could do anything with it dead. Everything seems to be working fine except my microphone, it’s very muffled or not working at all. My sound is fine, screen is fine, I don’t know how to fix it I just left it alone and it ended up being fine...
Chosen Solution I just repaired a broken screen & bad battery on my iphone6 & while I was in there used CRC Contact Cleaner 2000 to clean a prior liquid incident that didn’t kill the phone. The contact cleaner flushed a lot of contaminants out, but damaged the speaker housing. The phone works fine but the speaker sounds horrible. Clearly this was too agressive a cleaner, thought Anyhow, are there any aerosol cleaners that are safe for the plastics used in the iphone6?...
Chosen Solution “Unfortunately, the process com.google.process.gapps has stopped.” What does that mean??? Jobett T.C Lackay-Harris , chances are that an app is the causing the problem. Check out the links below, and follow the detailed instruction to hopefully solve this issue. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. https://www.androidpit.com/process-com-g… https://www.youtube.com/watch?v=pjH7Y8vN…
Chosen Solution Hello, I have read similar threads here but not exactly this one. I had my MacBook Pro 2.4Ghz for motherboard repair. When I got it back the fan is an all the time, even when the MB is cold. I have done the SMC reset, PRAM reset etc. with no help. I ran iStat Pro and it says that left fan is 0 rpm and right fan is 2000 rpm....
Chosen Solution Hello, I’ve been refurbishing an Xbox One that was original smashed when I got it. After I got all the parts to repair it, I partially reassembled it to test it. I would go to plug it in, and a few seconds after plug in power, the fan would spin for a few seconds, than turn off. It repeats the process three times, at the same time the power supply goes from orange to white, in the same sequence....
Chosen Solution Successfully replaced the Digitizer Screen assembly, but there is an opaque crescent shaped halo around the outer edges of the front facing camera. I’m thinking it may not be pushed all the way in its recess. Any other ideas before I go back in digging? Did the replacement screen come with the camera pre-installed or did you move it over from the cracked screen? If you moved it, chances are it’s not lined up properly....
Chosen Solution I have a Frigidaire gallery fridge model # LGHB2869TF3. I got this fridge 2 weeks ago and the motherboard went out (according to the repairman). I have replace the motherboard but it still doesn’t seem to be cooling. The repairman told me when he checked the fridge the first time that the fan and the compressor were fine. What else could this be? Hi @kat2127 , Is it a “new” fridge, i....
Chosen Solution Awrite man got a question aboot MA laptop its a Samsung 3 series model number NP370R5E-A05UK and I was wondering if you know or could find out how to access the hidden Intel menu in the BIOS ? I know for older models there were hotkeys to press when inside the BIOS to open this menu up but can’t see much aboot it online for this model On older intel boards there was a hidden bios for overclocking your board but this was only on intel boards and was discontinued for obvious reasons....
Chosen Solution I got my vibration motor replaced after it stopped working but after installing that and putting it all back together I relised my home bitton doesnt work at all. Ive tried the usual resetting it and making sure all connections are on but its still bot working. I did find a wee nick in the cable going from the lightning and audio jack to the motherboard and was wondering if thats the problem....
Chosen Solution My 40" Samsung television suddenly decided to change the screen colors. At first everything had a pink hue. Over time, it has changed to a white hue. I can still see the picture but it is totally bleached out. I have tried different connector cables, unplugging anything not needed (like WiiU and Roku), trying every display setting, resetting the display settings, and unplugging it from the wall. Occasionally the picture will be back to normal but it only lasts for a few seconds....
Chosen Solution The iPhone doesn’t read anything i press on the screen. I took it to an expert to take a look at it, and apparently the iphone has a bent motherboard. every time i want to use it I literally need to slightly bend it for it to read my fingers. Can this be fixed by replacing the rear case? any other suggestions to fix this problem? The motherboard bending is not a problem....
Chosen Solution Recently I noticed a small shadows inside my iMac screen, I tried to search for a solution, but all I can find is the cleaning process for non-unibody iMacs (before 2012 models). Is there anyway to clean it? Given the age of your system I would bring it back to Apple as this would be covered under warranty. The display cover glass is now a sealed with the LCD panel (thin series) all one unit, unlike the older iMac’s....
Chosen Solution My Viglen Connect 10 Tablet has really slowed up even basic actions, how do I check? If it was my old XP computer I would know how, but not Win 10. Also I don’t mean to be cheeky, but I have a Medion Win 10 netbook which will not update to an sd card even though set up to do so, any help would be appreciated. Thanks, Don....
Chosen Solution Cannot find transmission dipstick There is no dip stick on a Jetta of this year the way you check it is to actually pull the drain plug with the transmission at normal operating temp . This video shows how Hope this helps The tranny is sealed tho most have pour spouts to add it. The 5 cyl auto on the 06 is a nightmare tho. It doesn’t have a pour spout....
Chosen Solution The shooting Boton do not shot at the time that I want to. Read page #37 of the manual and turn off the delayed timer: http://cdn-10.nikon-cdn.com/pdf/manuals/…
Chosen Solution Hi. I’ve got a Dell U2713HMt. After i returned from a break to the monitor it only shows a blue image with vertical lines. The lines ar changing every time i’ve move the mouse or open the start menue. Here are 2 Pictures how it looks like if you turn on the monitor without any cable connected to an computer: You can find a Video (not from me) which shows the error: here I’ve already opened the monitor and looked on every board....
Chosen Solution Hello guys! I just disassembled a bricked New 3ds XL that I just bought to change its motherboard. After reassembling it, powered it on and voila! It was working, although the top screen was black. I thought I may have had some ribbon unplugged, so I just started all over. After reassembling it for the 2nd, 3rd and 4th time, the top screen works flawlessly but the bottom screen doesn’t....
Chosen Solution I have a Netgear Ethernet Switch GS105 , but I don’t think that I can connect it properly yet. It appears that I will need two extra Ethernet cables, one from my Router to the Switch and then another one from the Gigabit Switch to the Server PC or Mac, I am not sure which Cable Category that I should have for this or if it should be a special cable....
Chosen Solution Hi, just a quick question I have Does the Late-2015 iMac 27” (SATA model and not the fusion drive model) still come with the blade drive socket to plug in PCIe/nvme drives? I have done ton’s of upgrades to the fusion drive models installing NVME drives but just wondering if Apple also supplied the standard SATA models 27” iMacs with the socket/port on the logic boards or only on the fusion/SSD drive models?...
Chosen Solution My hotpoint first edition 1000 wm52 washing machine lock has played up a few times, i’ve fixed it each time as its happened when the door is open. This time, it has happened in a locked position, but the door is closed. So I can’t get into the machine to sort it out. Have tried going from underneath like a video showed (not on this model, but on another washing machine) and thought it was worth a go....
